@dc42 Okay, thanks! I do think the docs could be clearer about that, although in fairness it's a nonissue for most motion systems. Appreciate the help!
@Aurimas if the print pauses then there will definitely be a reason or something recorded.
you can use M122 "DSF" to get some extra data
you can also get logs directly from DSF https://forum.duet3d.com/post/314758
@icecube45 Wow, i recently had this problem after switching from duet 2 to duet 3 mini 5+ and M18 E0 before homing worked like a charm, i think this problem might come from different TMC drivers and their switching frequency.
@Exerqtor You are correct. Not sure if prusaslicer has paint on colors for multicolor printing or if that was added with Bambu slicer. I know prusaslicer had paint on supports and support blocking.
Thanks @mendenmh. I am close to sea level but will make sure to check the barometric pressure. I also saw all kind of other rules of thumb (e.g. immersion depth) and realize that I will just scratch the surface with my limited knowledge and means.
