@Phaedrux Yes, sorry for the bad terminology. Only reason I ask, I have an RPI3 running now on my printer, but i would like to pull it and put the Tinkerboard on it. I could use the RPI3 to run an AstroyBerry server for my telescope. With the prices of RPIs rignt now, i would wrather not have to buy a RPI4...

@MintyTrebor @jay_s_uk Thanks guys, FW/DWC v3.4.5 and Btncmd 0.10.15 has everything working in regards to no more DWC jog errors and Fxing btncmd 🙂

@jay_s_uk

oh fuck me, i dont have a backup and it took me days to get everything right incl. the bltouch - i guess i just learned to make backups...

Any way, thanks a lot for your help, id did not occur to me to check the SD Card

@jens55 Thanks!

@MintyTrebor Perfect, I just exported locally to file, emailed to the device, imported on the device and now just a matter of scaling the controls. So much faster!

Now I have a saved copy for cache clears. Thanks a ton, a wonderful plugin you've got there!

@axiom
When you home the axes, they will move to the end stops and set that position to whatever you have as the minima in M208 (if homing to min end stop)
So if you home it then drive to the point on the bed where you want to be zero and it says you're at X90 Y30, you would change M208 in config.g to be M208 S1 X-90 Y-30

@T3P3Tony said in instant extruder speed:

@paolozampini1973 unfortunately not, this display relies on information from the newer firmware.

OK

It is not opened to the internet, but it is in a network with internet access. I think having a password is better than having none, so how to save it in my browser?

Thanks Jay for the quick reply. Sounds like I am good to go then.

Updating my progress:
I tried switch to H264 codec with reduced resolution of 1920x1080 and no changes appeared. I also tried lowering the resolution in hopes it was an issue with bandwidth.

The camera is indeed returning a JPEG still image. When I go to the webcam tab, I can right click next to the iFrame and click reload frame and it updates the image. I think it would be fairly simple to create a script that automatically reload the frame at specified intervals but I would assume that is what "Webcam update interval (ms)" is supposed to be doing.

I did some digging on this camera and it looks the keyframe interval is locked to 0.1. Not sure if this would be an issue interfacing with DWC.

Any help is appreciated!

I've attached screenshots of my DWC settings as well as the IPC settings.
Screenshot_20230105_033400.png Screenshot_20230105_032629.png Screenshot_20230105_032557.png

@chrishamm
WTF, now it suddenly shows up like it should on my end as well. Might have been something weird with the chrome version i had installed or something in the browser cache maybe?
Anywho, it apparently fixed itself so don't mind me!

@Herve_Smith Then you need to change your (browser's) locale. DWC already uses .toLocaleString() for Date instances like in the "last modified" column.

@dc42 I also let out the ( ) in my original config and that worked too. So that seems to be the real problem. Thank you 🙂

May be worth clearing the cache in your browser as well.

@jens55 said in DWC 'home all' vs 'homeall.g':

@oliof, interesting, so my guess of a 'homed' flag was actually correct? Cool .....

Yes, G28 flags the axes mentioned as not homed (or all axis of you didn't mention any) before it runs any homing macros.

@PCNoobNeedsMajorHelp Make a new thread for this question. Make the title specific for greater visibility and more useful responses.

Ian

@Sindarius said in Height Map Padding:

@CCS86 e23b9a7e-baa4-4f3c-a4d1-42df5972d9ed-image.png

Looks great, thanks!

@Dizzwold said in DWC G32 Dual Leadscrews:

What I don't get is in the following, if the right-hand side of the bed/leadscrew is at 0.001 why has the unit decided to move that leadscrew 0.128

The 0.001 is the deviation of the measured points (the mean of them is -0.128),not the measurement at the second point.

@Yar m503 reads config.g not what currently stored in flash. Run G31 to find the current value. You will have to edit config.g to save the value

@JlunaMX said in Error: Probe already triggered at start of probing move:

"Error: Heater 0 fault: temperature rising much more slowly"

Have you done a PID tuning of the heater yet?

https://docs.duet3d.com/en/User_manual/Connecting_hardware/Heaters_tuning