@dc42 Good morning I have been trying to talk to you for several days obviously you are very busy I can understand it but I want to talk to you about the problems that exist DUEX 5 V0.11 at least tell me if you are interested in talking about the problems that exist on the V 0.11 at least answer me I ask you please please THANK YOU
believe me I have been waiting to talk to you for a long time several days I let you know if you are interested because I want to talk to you to clarify some problems on this v0 11 since in v08 I did not have all these problems Thanks again
paolozampini1973
@paolozampini1973
Best posts made by paolozampini1973
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
-
RE: duet 2 wifi original
@jay_s_uk Yes yes see dealers in Italy and DHM Anyway thanks for the reply
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@engikeneer In practice my printer is composed in this way or four extruders with 4 nema 17 Then I have the Z axis with two motors then I have the x axis controlled by the external driver dm860h and also the external Y axis controlled by the Driver dm860h everything works on 15 mm linear guides with SF1204 screws and the loss of step I had only and only when I was going to make the seams Tighter than 10 mm if I don't do the seams I have no problem I can easily turn 120 even 160 mm without No loss of step but if I go to do the seams seams I lose the step even 50 mm this with two ex 5 well V 0.8 this is the only problem I had and now I find myself six problems to solve what I say but if a person spends money to have more problems than before honestly he has no logic I hope to be understood and understood why I would not have spent more money to have more problems usually more money is spent to have less problems in this case I have spent more money to have more problems I hope I was clear
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@tekkydave start to think that it is I who do not explain myself well or someone cannot understand my problem but strange because I have explained it as many times as possible every time I am wrong to explain my problem then there is another speech each one gives I am pleased with advice but you cannot give advice and then not follow the advice because in this way you do not get to really anything so if someone can be so kind and courteous You should follow the problem is that if someone gives me advice and then it disappears is no longer heard is useless Anyway thanks
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@tekkydave however in all this I am really curious if someone really wants to help me because as I have already said at least 10 times with the v 0.8 I did not have any kind of problem a problem that I had a loss of step on some print seams and now I find myself with 6 problems so INSTEAD OF IMPROVING AFTER I made a V0.11 upgrade the facts say that I did a downgrade I don't know if I practically explained myself by switching to V0.11 I should have made a qualitative leap and solved all the problems instead I find myself with 6 more problems I do not know if I have explained myself but no one will follow my problem nor even the engineer because I do not think that all these conversations have not read it AND in any case the V0.11 has problems
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@engikeneer I WANTED TO THANK YOU FOR THE DEDICATED TIME
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@droftarts In the end he made a project it's like building a building But then a window is missing you make a million dollar project and you get lost for $ 10 I don't know if I made myself clear
look you can also block my account the post whatever you want because you have the right to do it but I guarantee you if the engineer does not help me I know how to find him because it is his responsibility and not so much solutions that don't really make sense with the upgrade I created 6 problems and before I had one and it wasn't fixed I had a loss of pace and even now what do I do for lack of it I have to redesign everything -
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@droftarts I want to see this engineer how serious how responsible he is I am waiting to talk to him you can also tell him if he is a serious person he takes his responsibilities because for € 0.30 he could have solved the problem do not make a card you know you already have the problem not the make out when all drivers work 5V
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@droftarts practically it is like building a car and then the power supply is 6 volts instead you need 12 times to make all the bulbs in the car work you understood what I mean it is not a contradiction and then it is out of all logic
-
RE: DUEX 5 V0.8 TO DUEX 5 V0.11
@infiniteloop what I want to tell you is that if all the drivers work at 5 volts it's a good 95% what do I do with 3.3 v answer this question and when you create such a circuit what does it cost to integrate a 5v signal converter ?
Latest posts made by paolozampini1973
-
RE: CURA 5.3 does not load the plugin
@Phaedrux I also changed the cure versions but nothing to do. Thanks
-
CURA 5.3 does not load the plugin
@Phaedrux Can anyone help me I installed cura 5.3 and I installed the 1.2.10 plugin but it tells me that it could not be loaded because it is not possible to configure it and I also tried 1.2.9 and I tried many older versions up to 1.2.4
-
RE: instant extruder speed
@T3P3Tony said in instant extruder speed:
@paolozampini1973 unfortunately not, this display relies on information from the newer firmware.
OK
-
RE: instant extruder speed
@droftarts said in instant extruder speed:
@paolozampini1973 It has been added to RRF, I think it is this: https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x-Beta#reprapfirmware-350beta1
Added floating point field move.currentMove.extrusionRate (returns the current total extrusion rate in mm/sec)
We are testing internally a version of DWC 3.5b1 that shows volumetric flow:
But you should be able to see it through the Object Model.
Ian
it is possible to have only the upgrade of the instantaneous volumetric part of the extruder and without upgrading all the firmware because I don't want to have problems and by the way everything works fine now
-
RE: instant extruder speed
@droftarts said in instant extruder speed:
@paolozampini1973 It has been added to RRF, I think it is this: https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x-Beta#reprapfirmware-350beta1
Added floating point field move.currentMove.extrusionRate (returns the current total extrusion rate in mm/sec)
We are testing internally a version of DWC 3.5b1 that shows volumetric flow:
But you should be able to see it through the Object Model.
Ian
GRAZIE
-
RE: instant extruder speed
@Phaedrux said in instant extruder speed:
@paolozampini1973 It is available now.
https://github.com/Duet3D/RepRapFirmware/releases/tag/3.5.0beta1
Thanks for the information. Here I understand that the instantaneous extruder velocity function has not been added as @dc42 said
-
RE: instant extruder speed
@dc42 said in instant extruder speed:
@paolozampini1973 I hope to release 3.5beta1 next week. It's currently in the testing and bug fixing phase.
Good morning when will firmware version firmware 3.5beta1 be available ?
-
RE: Spindle nema 34 duet 2 wifi
@oliof said in Spindle nema 34 duet 2 wifi:
@paolozampini1973 Duet2Wifi will not be able to fit new features due to space constraints.
thanks for the answer can it be clearer please Thanks
-
RE: UPDATE VFD TO NEMA
@jay_s_uk said in UPDATE VFD TO NEMA:
@paolozampini1973 what @Falcounet said. And the firmware doesn't support continuous rotational axis. And you can't move an axis that isn't in sync with others
Thanks for your answer
-
RE: Spindle nema 34 duet 2 wifi
@dc42 said in Spindle nema 34 duet 2 wifi:
@paolozampini1973 @CNCModeller if there is enough interest then I can look at providing the option to run a stepper motor as a spindle in a future version of RRF. However, it's likely to be a Duet 3 feature only because of lack of flash memory on Duet 2.
reading on the forum I saw that there are people particularly interested in the DUET 2 WiFi As for removing plastics with a cutter, I have a lot of experience and also with turning, over time I have understood that high speed has many disadvantages It is better to work at low speed with some strategies you can achieve excellent results without lengthening the times excessively