@patrickwjoyce , try starting your macros (homex.g, homey.g, homez.g) with command
M400 S1 ; wait until motion stops, do not release any axes or extruders

@chrishamm This error shows up more frequently with 3.60-b2

@Subractive Please post your full config.g here as well.

You guys rock !!!

@pouryatorabi I can't think of anything, but am looking forward to suggestions, if there are any by others

@Ballador I've just tried this using a recent 3.6 (standalone) build. Works fine for me on Chrome on Windows 11, ChromeOS (Asus Chromebook) and Android (Pixel 7a). Not suggesting you should switch to 3.6, just providing another data point.

@chrishamm Gotcha. Thanks for the info 👍

Implemented limit checks and machine position calculation so the moves work properly, this is how it works in practice: video

@DK4YA said in Tool Fan selector in Duet Web Control:

I'll try here. There is still no solution for the double controller with the same function?

The solution is to hide the slider if you don't want to see it duplicated.

@droftarts, @oliof

Thanks for the info. I will ensure to close all browser windows before doing any more testing.

I am not sure it is related, but my network setup is 2x Asus rt-ax56U routers, one main, one a mesh access point connected on a wifi backbone with the duet via ethernet.

Oddly, the board no longer appears in the list of clients even though I can connect to DWC. It seems to be causing issues on my network. Unclear to me what is going in. I may redo my network and see if there is any improvement.

@droftarts Understood, thanks again, prevented me from wasting a day chasing my tail 😉

@jay_s_uk It seems like I instantly felt in love with BtnCmd. 😄

Cheers....

@droftarts Even if there is a slight hiss, it is enough. I am doing this to test the pins for now. That is my purpose. I connected one end to spi.cs2 and the other end to ground

@DonStauffer You could connect via USB while the printer is running, and turn the WiFi off and on with M552 S-1 then M552 S1. Otherwise I think it will be fine to leave it until the print finishes.

Ian

@rechrtb Yes. I have all three machines open in different browser tabs on multiple computers.

This worked, Thank you!

@jayem1427 try yawcam https://www.yawcam.com/ that should work I think

@cosmowave thats great. many thanks

@mopedwizard current DWC (3.5+). shows extrusion rate during prints. Its also part of the object model https://github.com/Duet3D/RepRapFirmware/wiki/Object-Model-Documentation#movecurrentmoveextrusionrate

@dc42 , After installing the new MB6HC binary from the link you provided, the problem was completely resolved. THANK YOU SO MUCH!