Duet 3 demo at TCT

T3P3Tony

@percar we want to have some initial production boards in Q2 2019.

fcwilt

@phaedrux said in Duet 3 demo at TCT:

modern Linux operating system

You have a great sense of humor!

Frederick

fcwilt

Hi,

The new design looks very well thought out.

It's a good thing it is not going to be around until next year - gives me time to come up with the reason why I have to have it - it's a "wife" thing.

Frederick

NoSkillzEngineer

@t3p3tony Hey, so how close are you guys to that Q2 2019 goal for early production boards? Can you take my money for it yet?

Surgikill

Would it be possible to make an expansion board that mounts directly to the extruder? Say it has a single stepper driver, some PWN fan controls, Z probe input, heater control and a thermistor input? Would be really nice if all you had to run to the extruder is power and data, instead of having a mess of wires like normal. Would also make tool changing much easier.

Phaedrux

@surgikill said in Duet 3 demo at TCT:

Would it be possible to make an expansion board that mounts directly to the extruder? Say it has a single stepper driver, some PWN fan controls, Z probe input, heater control and a thermistor input? Would be really nice if all you had to run to the extruder is power and data, instead of having a mess of wires like normal. Would also make tool changing much easier.

I think they've actually talked about a board exactly like that.

dc42

It will be a smart tool board, handling at least an extruder motor, heater, temperature sensor, 2 fans and a Z probe.

wilriker

I do have a Duet 2 - I don't need a Duet 3 - I do have a Duet 2 - I don't need a Duet 3...

Just practicing. I need to get this mandra working until Duet 3 is available.

dc42

I was testing the Duet 3 second prototypes earlier today.

fma

@wilriker said in Duet 3 demo at TCT:

I do have a Duet 2 - I don't need a Duet 3 - I do have a Duet 2 - I don't need a Duet 3...

Just practicing. I need to get this mandra working until Duet 3 is available.

"This Is Not the Duet You Are Looking For"

c310

@dc42 said in Duet 3 demo at TCT:

I was testing the Duet 3 second prototypes earlier today.

what are the main cool features, compared to DuetWiFi ? will you uncover a bit?

this link www.duet3d.com/duet3 does not work

deckingman

@c310 That link works for me.

deckingman

@wilriker said in Duet 3 demo at TCT:

Just practicing. I need to get this mandra working until Duet 3 is available.

Manuel, - it's "mantra" not "mandra" (that's a town in Greece). Oh and it's "practising" not "practicing".

Here endeth the English lesson for today

wilriker

@deckingman Yeah, the mandra-mantra thing is the same in German.

But with "practicing" I can - for once - correct you. This is the valid American spelling. And since I usually also write "color" and "honor" I consider this correct.

deckingman

@wilriker I gave you an English lesson, not an American lesson. They drive on the wrong side of the road and use all the wrong words for parts of cars (trunk instead of boot, hood instead of bonnet etc).

DocTrucker

@deckingman; but at least they don't call a damper a shock absorber, which technically is the spring!

Edit: Conversations that are not intended as formal publications (particularly online) being pulled off track into irrelevant discussions in grammer, spelling, or other language technicalities is a pet hate of mine.

By all means raise questions when the use of language has left the message unclear but otherwise it serves little purpose.

deckingman

@doctrucker Fair comment - and apologies. (Although sometimes a little light relief can be welcome).

DocTrucker

@deckingman no worries!

zapta

@phaedrux said in Duet 3 demo at TCT:

USB webcam support and easy time lapses

+1 for a plug and play camera.

A simple way to plug in a small off the shelf camera (Aliexpress generic modules or DueCam) would be a great addition. Being able to view the stream remotely in the web interface.

NoSkillzEngineer

@dc42 said in Duet 3 demo at TCT:

It will be a smart tool board, handling at least an extruder motor, heater, temperature sensor, 2 fans and a Z probe.

What about support material? Add either an additional servo header or a stepper heater and temp sensor, maybe up the amperage allowed on the fan headers (or generic pwm headers) for larger builds so that pwm header could allow for small brushed motors to be controlled by that same circuit board? I have some ideas lingering that might expand the machine capabilities of the duet3.