Aliexpress selling GENUINE Duet Boards?
-
I would suggest adding a note to your websites like DJ did on the piezo sites explaining how to tell if they got a legit or clone board because the users will be coming here/etc for instructions/support/firmware.
-
Was it really at half price? Seeing $133 down from $145 today.
-
I have to say that your attitudes to being copied like this make me really proud and happy that I decided to go with the duet wifi. I researched 32 bit boards for quite some time before settling on the duet.
Luckily I was about to go with the (what I think is WAY over hyped) smoothieboard, but got majorly turned off of it by the designer Arthur Wolf who in many forums bashed anyone else trying to do a 32 bit board and pretty much trashed anybody who bought a smoothie clone.
To be honest it is refreshing to see people responsible for creation roll with the punches of being cloned after weeks of reading all of the trash talk from smoothie developers.
I just wish you guys had the high profile of the smoothieboard, you definitely deserve it, the Duet series boards are way more polished and refined than any other 32 bit out there and yet other than here there is not much out there about you.
I love my Duet wifi and my smart effector, but what has made me a Duet customer for life is the attitudes of all you guys out there that develop these things.
Thank You all for designing such good hardware and then going above and beyond with your helpfulness and great attitudes. -
…
I just wish you guys had the high profile of the smoothieboard, you definitely deserve it, the Duet series boards are way more polished and refined than any other 32 bit out there and yet other than here there is not much out there about you.Thank you. Please help spread the word on other forums!
-
…......................
Please help spread the word on other forums!Doing my best - my blog gets between 50 and 200 visits per day and my YouTube channel gets around 400-500 views a month. I mention Duet a fair bit in both
-
I also push it quite extensively in the 3Dprinting Discord Chat group which can be accessed at https://discord.gg/eY2WJR3
-
I give it the big thumbs up whenever its germane to the conversation, but people are very stubborn, I was one of them until I tried it.
I wonder if a suitable strategy might be to follow Nissan with the Leaf electric car, give you one for a week for free, knowing that you'll want to buy it at the end of the week almost for sure.
-
I am spreading the word for quite some time now already in the 2 FB Groups I administrate. I was asked several times, if I get any freebies from you guys for shamelessly advertising your boards whenever I can . But the feedback of the satisfied user makes it worth it.
And I actually managed to discourage several people from buying that crap on Ali and instead going for the genuine board. And this is, as other already mentioned, because of the Duet community here and in other places, that actually makes the difference.So, keep up the good work. And if someone wants to build the ultimate CoreXY printer, then maybe the Hypercube Evolution is the one for you Visit us in our FB groups or on Thingiverse…
-
…....................................And if someone wants to build the ultimate CoreXY printer, then maybe the Hypercube Evolution is the one for you Visit us in our FB groups or on Thingiverse...
Nah, that's a bit small- oh and it's only single colour too How about build volume 360 x 360 x 770 and 5 colour? https://somei3deas.wordpress.com/my-corexy-printer-build/ and https://somei3deas.wordpress.com/my-corexy-printer-build/5-colour-upgrade/.
BTW the link to Thingiverse shows the Hypercube Evolution as using Ramps1.4, under "Control System" not Duet.
-
As a very pleased owner of the Think3dPrint3d Kossel Mini kit (Duet 0.85) I see more reasons why people are buying such clones beside the lower prices. An average maker like me, will have major problems building his own printer just from a BOM and some drawingings. Maybe not only for skill but also for time reasons.
Before I decided to build my own printer, I did a lot of research what is available on the market and where to buy. Happily I found the kit from T3DP3D. When looking around nowadays , there are not many well documented and advanced kits that don’t come from China sources, may be the original Prusa i3 and a few others. Even fewer are featuring the Duet Wifi. I don’t know why T3DP3D has discontinued the kit, but there where good reasons I assume.
In summery most BOM are based 90% on Aliexpress and the remaining parts are often from USA, where ordering directly mostly ends up with unpleasant hours in the local tax office (at least in my German city). I think most people feel ordering a few more parts from Aliexpress is just comfortable, so why looking for the original designs.
I can’t judge the current 3D printer market, but the success of the original Prusa i3 seems to prove that there is a demand for good maker kits, even when not in the lowest prince range.
Personally I would like to see a good kit, with all the recent developments that are available or discussed on different threads of this forum.
-
I think T3P3 discontinued their Mini Kossel kits because it was too hard to compete with the many Mini Kossel kits coming from China, even though the T3p3 kit was much better.
If you look at their listing at https://www.think3dprint3d.com/3D-Printer-Kits/Kossel-Mini-3dPrinter-Kit you will see that they are now producing a limited number of Kossel XL kits. These are similar to my design at https://miscsolutions.wordpress.com/dc42s-large-kossel-build/ except that the frame is black and the bed heater is 24V.
The other kits I know of that use the Duet are https://www.ultibots.com/d300vs-3d-printer-diy-kit/ and https://www.seemecnc.com/collections/diy-3d-printer-kits/products/artemis-300.
-
deckingman, nice printer, but well, our printer design is more the printer for the average user for a very attractive price (The standard 300x300x350 is around 450 Euros). And the dimensions are not fixed, neither is the hotend. We have users, that built an EVO with 600x600x1000 that runs very nice and still is easy to build. More than 130 have built one until now, can not be that bad
And the Thingiverse list shows of course the cheapest possible way to build that printer. But the advantage is the possibility to upgrade, no? And many have upgraded to the Duet Wifi.
And where is your design published and shared? -
deckingman, nice printer, but well, our printer design is more the printer for the average user for a very attractive price (The standard 300x300x350 is around 450 Euros). And the dimensions are not fixed, neither is the hotend. We have users, that built an EVO with 600x600x1000 that runs very nice and still is easy to build. More than 130 have built one until now, can not be that bad
And the Thingiverse list shows of course the cheapest possible way to build that printer. But the advantage is the possibility to upgrade, no? And many have upgraded to the Duet Wifi.
And where is your design published and shared?Hi. My post was meant to be "tongue in cheek" hence the smiley. No offence meant. It's just that you said yours was "the ultimate coreXY" so I felt obliged to mention my own. Mine is a "one off" that continues to "evolve" hence I haven't shared the design as it keeps changing. And yes, for sure a printer like is very much more expensive and definitely not for the average, "sane" person to build. Once again, no offence intended, I was just having a little fun.
-
…......................
Please help spread the word on other forums!Doing my best - my blog gets between 50 and 200 visits per day and my YouTube channel gets around 400-500 views a month. I mention Duet a fair bit in both
Your youtube channel… how is it called?
-
@DR8:
….........Your youtube channel... how is it called?
-
I have to say that your attitudes to being copied like this make me really proud and happy that I decided to go with the duet wifi. I researched 32 bit boards for quite some time before settling on the duet.
Luckily I was about to go with the (what I think is WAY over hyped) smoothieboard, but got majorly turned off of it by the designer Arthur Wolf who in many forums bashed anyone else trying to do a 32 bit board and pretty much trashed anybody who bought a smoothie clone.While I do think that Arthur has an attitude problem, I understand that situation a little differently. They're fine with people that make smoothieboards, for example, they're OK with Cohesion3D and Panucatt, for example. What they don't appreciate are the outfits that make their own closed source version (violating the license) and don't support the product they're selling. So it's these sellers leaching from them in two different directions.
I don't consider smoothieboard overhyped, but the Duet platform is clearly better in many ways.
-
@DR8:
….........Your youtube channel... how is it called?
WOW! That is a really impressive 3D printer dude! :)))) Congrats!
-
I have to say that your attitudes to being copied like this make me really proud and happy that I decided to go with the duet wifi. I researched 32 bit boards for quite some time before settling on the duet.
Luckily I was about to go with the (what I think is WAY over hyped) smoothieboard, but got majorly turned off of it by the designer Arthur Wolf who in many forums bashed anyone else trying to do a 32 bit board and pretty much trashed anybody who bought a smoothie clone.While I do think that Arthur has an attitude problem, I understand that situation a little differently. They're fine with people that make smoothieboards, for example, they're OK with Cohesion3D and Panucatt, for example. What they don't appreciate are the outfits that make their own closed source version (violating the license) and don't support the product they're selling. So it's these sellers leaching from them in two different directions.
I don't consider smoothieboard overhyped, but the Duet platform is clearly better in many ways.
Smoothie do have a difficult wicket as there are a lot of clones and a lot of people wanting them to support them. Whether this will be as big a problem for duet or for us as currently there are not that many clones in circulation I don't know. But whilst I will respond to general questions anything specific like why is my sensor not working, will provoke me to ask what was your order number and can you confirm your name etc….
-
… But whilst I will respond to general questions anything specific like why is my sensor not working, will provoke me to ask what was your order number and can you confirm your name etc....
We may have to start doing this too, because I can't afford to spend a lot of time supporting users who have bought third-party boards. The processor used in the Duet has a unique serial number, and we can use that to determine which Duets came from us.
-
We may have to start doing this too, because I can't afford to spend a lot of time supporting users who have bought third-party boards. The processor used in the Duet has a unique serial number, and we can use that to determine which Duets came from us.
This isn't my area of expertise by any means but some time ago I built a NAS which uses something called Unraid. The software resides on a USB memory stick and to use it, you supply the GUID of the memory stick and in return, receive a key which is linked to that GUID. I don't know if something like that would be a viable solution. i.e. purchasers of genuine boards receive a key which is tied to the processor unique serial number. So the software won't work with clones (because they won't be able to obtain a key). I guess that would infringe on the "Open Source" nature of what you are doing though? Dunno - just a thought…..