I could not find, if somebody already mentioned it, but in Europe the time (in the temp chart) is not displayed in "AM/PM" format. Maybe make it selectable, thanks.

Just curious, is this still the plan to offer Duets with better Wifi?
I am sometimes experiencing some signal strength problems with the Wifi and you guys mentioned an option with ESP-07.
We would require 2 Duet Wifi boards with external antenna too, since the boards would be within a metal case.
We would anyway appreciate, if in the long term the Duet Wifi could be ordered with the ESP-07 as an option.

Thanks in advance

Thanks, Dave.
Found it, made a new cable, now its working. Turned out that both of my cable sets were broken.

I did try 2 different ribbon cables, same result. Which one is the "processor pin" on the Duet connection and on which of the 2 connectors?

Hello, I have used the forum search but did not find anything to my problem:

I have connected a 12864 display to a Duet Maestro and uploaded some menu files. The Display is working so far and showing all kinds of infos on the screen and by TURNING the rotary knob of the 12864 I can highlight several menus / values.

However, pressing the knob has no whatsoever effect, no menu can be called or no value can be changed. The Duet just does not react on pressing the button of the rotary knob at all. Just nothing happens. I have tested 3 different 12864, all with the same result. Display is working, I just cant use the button of the rotary.
I have looked into the menu files themselves and they seem OK, calling the right action etc.

Any help would be appreciated.

Thanks

Duet Maestro 1.0 with 2.05 firmware

You are right, thank you very much. With the correct parameters the readings are now correct.

Hello,

I want to upgrade a D-Bot with a Duet Maestro 1 I have here for a while.
Now the weird thing is, that both (Bed and E3D Hotend) Thermistor Temps are shown as around 9° degrees celsius, although the room temperature is around 22°C.
If I connect both Thermistors to a Duet Wifi, the readings are correct. Only the Maestro shows the 9°C

Firmware is 2.05 and the Thermistor Lines are the usual:

M305 P0 R4700 H0 L0
M305 P1 R4700 H0 L0

Anyone has an idea, what is wrong?

Just curious, is this still the plan to offer Duets with better Wifi?
I am sometimes experiencing some signal strength problems with the Wifi and you guys mentioned an option with ESP-07.
We would require 2 Duet Wifi boards with external antenna too, since the boards would be within a metal case.
We would anyway appreciate, if in the long term the Duet Wifi could be ordered with the ESP-07 as an option.

Thanks in advance

I could not find, if somebody already mentioned it, but in Europe the time (in the temp chart) is not displayed in "AM/PM" format. Maybe make it selectable, thanks.

Any news on this topic, Tony? Thanks

I would be interested in testing one of those too, since I have several printers (CoreXY and Deltas, all with DUETs), use OpenSCAD myself and do Arduino Programming, I think I meet the conditions (Except living in Germany and not in the UK )

Hi,

is the magnet filament sensor still in beta testing? If so, is it possible to still participate? If not, then how to purchase the filament monitor? Since I have the "filament stuck" problem with a bunch of our printers, I would be very much interested in testing or using it. Thanks.