Anybody wants a stepper motor analyzer?

Michael Hathaway

@zapta interested

jay_s_uk

@zapta me too

martin7404

@zapta interested

bricor

@zapta interested

fcwilt

Sign me up for 4 units, please.

Frederick

alankilian

@zapta I would love to have one.
Thank you for doing this.

Nuramori

@zapta I’m in.

paralepsis

@zapta Interested!

3DPMicro

@zapta I would like one also please. I inquired about 3 months ago via chat

Luke'sLaboratory

I'd like one too

zapta

Thanks everybody for the interest. I order parts for 10 units. Will allocate them according to the order in this thread (one per person unless they will be spares).

If there will be more demand, I can do one or two small runs later. This is the first time I order PCBs with SMD service so prefer to keep it small.

The out of pocket expense for the parts (including shipping, taxes, etc) is indeed ~$30 and the pie chart shows the breakdown. As you see the 3.5" display with capacitive touch dominates the cost and prices went up recently due to the global shortage.

All parts were ordered from China, including the Pico which is currently hard to find at its nominal $4 price (Digikey has only 2 left, Amazon sell for $8 and up).

alankilian

@zapta If your out-of-pocket costs are $30 I'd like to send you $60 plus shipping for the unit.

Thank you again for designing, documenting and publishing the design of this unit.

zapta

Thanks @alankilian, I really appreciate it.

This falls into my hobby part of my life so my time if free and I enjoy it, not to mention giving back for all the help I have got here.

BTW, here is the Kidcad render of the PCB. The non populated components are not needed and were added to assist with the software development. The most difficult to solder are the two 0.5mm pitch flex cable connectors. I did solder them on the prototype but it was a pain (they bridge easily), so in this batch they will be soldered by the PCB vendor (JLCPCB), together with other components they stock. They don't have the Pico and the current sensor so I will solder them (easy) and so are the two connectors which need to be assembled in a certain way so they don't get shorted by the LCD on the other side.

Sotidii

I'd like one too

CCS86

It sounds like the first run might be sold out, but I am interested too.

What other features does it provide, besides the steps/s shown?

akstrfn

Count me in when you go for the second run

zapta

JLCPCB rejected the PCB order since one of the footprints was incorrect. I fixed it and increased the order to 20 PCBs. This run will still be of only 10 units (only 10 LCDs and Picos on order) but it will be easier to make the next 10.

This is the first order with this PCB layout so I don't want to commit to too many before validating it.

rtuinila

I would like one too!

droftarts

@zapta great work, well done. I’m waiting for @T3P3Tony to put my one of the old version together! I think we’re still waiting for the screen. A more commonly-available one would be good; maybe a PanelDue with different firmware?!

Ian

dc42

@zapta I would like one too.