I can't print object sliced with Prusa Slicer...

Torro

Any error messages?

My Problem was a missing "t0" in the Start Code

A Former User

No, no error messages simply the extruder moves soooooooooooooooooooooooooo slowly that the filament doesn't come out.....

bot

PrusaSlicer has an autospeed feature. Are you using it? Perhaps you don't have it configured correctly.

Phaedrux

Post some gcode examples otherwise we have no idea what's going on.

A Former User

It can't print every GCODE, it looks like the Extruder stepper spins with a low low low step/mm number....this is just a little example because only small files can be attached here....linked there are the extruder settings as well example.gcode

matt3o

@the_dragonlord have you tried disabling pressure advance?

dc42

@the_dragonlord, are you sure you have configured PrusaSlicer for the correct filament diameter, i.e. 1.75mm (assuming that is what you are using) and not 2.85mm?

matt3o

also if you are using prusa's presets be sure to remove any printer specific config in the filament gcode

A Former User

@matt3o yes

A Former User

@dc42 said in I can't print object sliced with Prusa Slicer...:

@the_dragonlord, are you sure you have configured PrusaSlicer for the correct filament diameter, i.e. 1.75mm (assuming that is what you are using) and not 2.85mm?

yes, it is 1,75

A Former User

@matt3o said in I can't print object sliced with Prusa Slicer...:

also if you are using prusa's presets be sure to remove any printer specific config in the filament gcode

No specific config are present

matt3o

@the_dragonlord I use absolute extrusion with Prusa, if that makes any difference

A Former User

@matt3o said in I can't print object sliced with Prusa Slicer...:

@the_dragonlord I use absolute extrusion with Prusa, if that makes any difference

I've tried both but none of them works.....

engikeneer

@the_dragonlord have you set a max volumetric flow rate (in printer or filament settings)?

What is your first layer speed set to?