Homeall Slams head to far corner

[fcwilt]

@mrenz999

I forgot to mention that issue with G32 having the same problem is bed.g issues G28 which runs homeall.g which is where the problem is.

Frederick

[mrenz999]

@fcwilt both work correctly. Different end stop switches.

[mrenz999]

@fcwilt so remove the G28 ?

[Veti]

@mrenz999 said in Homeall Slams head to far corner:

so remove the G28 ?

no fix the problem in homeall.g

[fcwilt]

@mrenz999 said in Homeall Slams head to far corner:

@fcwilt so remove the G28 ?

 G1 H1 X-500 Y-500 F3000 ; move quickly to X and Y axis endstops and stop there (first pass)
 G1 H1 X-500
 G1 H1 Y-500
 G1 X5 Y5 F6000 ; go back a few mm

Why do you have lines 2 and 3?

Frederick

[Veti]

@fcwilt said in Homeall Slams head to far corner:

Why do you have lines 2 and 3?

that for corexy because they cant move independently.

execute each line of homeall separately and see where the problem is

[o_lampe]

@mrenz999 said in Homeall Slams head to far corner:

G1 X222 Y201 F9000 ; go to first bed probe point and home Z
G30 ; probe the bed

Is that the line that makes your head crash?
Why probe at X222 Y201?

[fcwilt]

@Veti said in Homeall Slams head to far corner:

execute each line of homeall separately and see where the problem is

This isn't my problem - @mrenz999 was the OP - I'm just trying to help him.

Frederick

[mrenz999]

@o_lampe To probe the center of the bed.

[mrenz999]

@Veti So this is what I did. One line at a time. Commented out the first line G92 and it works correctly now. Strange.

[fcwilt]

@mrenz999 said in Homeall Slams head to far corner:

@Veti So this is what I did. One line at a time. Commented out the first line G92 and it works correctly now. Strange.

I don't see a G92 in your homeall.g file.

Is that where it was?

Frederick