maybe adding thumbnails of the actual screens can help reduce the number of people who pick the wrong file? then again its not so many, might not be worth the effort?
@dc42 Thanks for the updates on this. I have a tool board on backorder at Filastruder and looking forward to getting it. I hope your supplier issues get sorted out. That can certainly be a challenge these days.
Early effort, we may change this. Decided NOT to mount on the hermera itself, because it is already pushing "thickness" on that axis for "parking row" on this printer.
At the moment, this little test article is on my Jubilee, being slung around, it it seems OK.
I too was encountering "Packaging" issues with the tool board mounted on the extruder, my solution.
for the extruder you want to be around 400 steps /mm
this is normally achieved by using a 1.8 stepper with an 3:1 reduction, like in the bmg or titan.
for z 1.8degree steppers are fine. if you want finer resolution you can go with a different lead screw.
for example a 2mm lead screw with 1.8degree stepper gives 1600 steps / mm. more resolution that you normally need.
most people are fine with 8mm lead screw at 400 steps.
