Hello, thanks to the members of this forum and more particularly to Veti.

I solved my problem and my current tests are very good. I only have a few small adjustments left and everything will be on top!

I still have a question ... I would like to get the best out of G32 and G29 in my impressions. How do you go about your settings?

You make a G32 in your slicer and you included in your Bed.g G29 or G29S1 file or else, you put G32 and G29 (S1) or vice versa in your slicer or do you use another method?

I take your advice once again.

I definitely left the capacitive probe to the detriment of the mini IR probe.

The reason is that for me the weight of the capacitive probe was a bit too heavy. She was exerting a difference on my bed when polling.

FYI, my bed is not absolutely stable and the slightest difference in weight causes a difference in the measurement in the height map.

I will be working on another much more stable bed system soon, so I will test again.

@Veti

So for me, I need one ... I'm Duet WiFi 1.02 if I understand correctly?

@fcwilt Thank you. Sounds well thought out!

@fcwilt said in Pulley VS belts:

Salut,
Je suppose que vous parlez d'une vidéo? Je peux certainement en inventer une rapide si vous le souhaitez.
J'ai inclus un capteur de butée sur chaque axe Z qui gère le lit s'il est grossièrement hors de niveau.
Ensuite, la fonction de mise à niveau automatique termine le travail.
Frédéric

Indeed I would like to see the result on video, but I don't want to disturb you! Did you create your printer by taking a model or plan from the internet or did you create it according to your own plans and ideas?

@mrehorstdmd impeccable !!

@fcwilt said in Pulley VS belts:

Très heureux avec les resultats.

Hi Frédéric, This is exactly what I want to do ... I want to put three independent belts each with their own motor (in a triangle position on the bed frame) with the automatic leveling ... Do you have a demonstration of your printer? Thank you

@mrehorstdmd said in Pulley VS belts:

Mon imprimante utilise des courroies pour soulever l'axe Z et un réducteur à vis sans fin sur le moteur qui empêche le mouvement du lit lorsque l'alimentation du moteur de l'axe Z est coupée. Ça marche bien.

Do you have an example of your reducer ?

Thank's

@Veti Thank you for that clarification…

Good morning all.

Straps instead of lead screws for guiding the bed (Z) on a CoreXY?

I am thinking about modifying the displacement of my bed on a CoreXY. My idea is to replace the lead screws with a belt system ... The advantage in my opinion is that this system is less strict in alignment and therefore has less friction. However, the flaw is that you may need a pulley system to increase the force and find a solution so that the plate does not come down when the machine is off. Who uses belts on this type of installation?

Thank you

@ziggymanpopo Late response due to my work ... Thank you for sharing, I admit that your technique has already turned in my head!

Good morning all,

I'm using your time to do a little survey ...

What do you use as a slicer?

Personally, I used Simplify3D quite a while, I was almost happy.

Cura, I've always complicated it a lot so I can't assess how it looks.

And there, I have been working with PrusaSlicer for 6 months and find it perfect.

Thank you

Thank you for your explanations !