What do I need?
-
Sorry - english is not my native language
To get the electronics to a build a DIY Printer like the Tool Changer.
6HC + Duet 3 Tool Distribution Board + 4 * Toolboard 1LC
Or do I need to the above a Expansionboard 3HC
Three Axis by the 6HC and 4 Extruders by the Toolboards over Ditribution Board.
Did I vorget something?Gruß zeroK
-
A Duet 3 MB6HC by itself has enough of everything to drive 2 tools. For the remaining tools you have a choice of 2 tool boards or 1 EXP3HC. Tool boards need less wiring if the tools are direct drive and there is space to mount the tool boards on the tools.
If you have 4 direct drive tools then you could choose to drive each one using a tool board, but of course that would cost more compared to driving 2 of them from the main board.
-
Thank you dc42
I very prefer the method of less wiring, not only to assembling the Parts, for maintenance over a longer time too.I watch the Shop when the Parts are available again.
Thnk you, have a nice evening
zero K
