@Veti
Thank for the info
The machine been running well
Most of my config are from others
Who have posted info on my type
Printer
This config is something i had not touched and didnt realise this was set to 24v
I will update and make the changes

@bearer said in Heater Fault reset - negative time:

does it persist or could it be a one-off daylight savings time thing?

Well, it did it consistently (multiple times) while I was playing with my heaters (hence multiple faults) this morning.

Both the printer and the firefox had been running since before the clocks changed. Having power cycled the printer and stopped and started a new firefox, it now works as expected with no negative time.

Whether it's clock-change-related or coincidence, switch-it-off-and-on-again seems to have fixed it.

@apak It's unclear what you're referring to. This thread is a year old now. Perhaps you should create a new thread and include more detail about your setup and what is happening.

@OwenD

When I load the plugin it is always zoomed all the way out so zooming in with mouse wheel
brings it on screen I use Chrome it does however fail randomly sometimes.

@Phaedrux said in Multiple M118 Messages show as one in the console?:

It would help to know your Duet board, firmware version, and DWC version.

Board: Duet WiFi 1.02 or later + DueX5
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 2.05 (2019-12-13b1)
Duet WiFi Server Version: 1.23
Duet Web Control 2.0.4

Are you using M118 instead of M291 for a particular reason?

I was using M118, as it looked like it was the more flexible option. For example it seems like if I were to add a PanelDue, m118 with no P parameter, then it would send a message to the webcontrol console, the webcontrol lower right popups, and the PanelDue.

M291 doesn't seem to log anything to the console, and if two messages fire in rapid succession you will only see the first one.

probably missing www folder on sd card?

https://duet3d.dozuki.com/Wiki/SD_Card#Section_Creating_the_file_structure

shows how it should be, download the duet web control files and put in the www folder on the card

https://github.com/Duet3D/DuetWebControl/releases

@achrn That's all well and good, but it seems unnecessarily confusing. What I did isn't technically wrong, it just happened to run afoul of a bug. I like being able to reference heater, output and sensor by the same number to avoid any potential mistakes in the future when I haven't looked at the file in months and suddenly need to make changes, especially when using these boards on many different types of printers that have completely different physical configurations

thank you that works

@toufou54 If this is all confusing I suggest you hold off on updating to a beta firmware release.

@bearer I've had some issues getting conditionals to work correctly in the macros in current RRF so I've avoided them but that's a good idea.

Did you manage to make this work at all? If so do you happen to have the config files associated with it for the Duet 3? I'm also trying to get a workbee - like machine (the Lead 1515) to work on the duet 3 but I'm sooo stuck right now, don't know how to begin really.

First of all thank you for all of your help.
Finally I found my problem what is causing the webserver to stop working when y-axis is moved by firmware or manually pushed.. :D.

The wires of the Y-Axis Stepper where to close to my Ethernet-Cable.
Worked perfectly for 2 years until now..

electro magnetic disorder

@MRJEON said in About the pause function:

If so, is it possible to pause and jog control?

What exactly do you mean by "jog control"? You can move the print head around while paused, and the original position will be restored when you resume printing. If you want to apply a permanent change in position, use the babystepping function.

If that doesn't help, try a different SD card.

Are you sure nothing has changed in the config or slicer setup?

Are temperatures reporting correctly?

Can you jog axis at all?

How are you trying to start the print job?

Used fallback procedure 1 and all is good.

And yes, it looks like the issue was that I had multiple tabs open.... 🤦

Thanks @Phaedrux and @chrishamm

Thank-you, updating the firmware fixed the issue

@ErwinH78 maybe using node-red and this? https://forum.duet3d.com/topic/18520/node-red-mobile-sized-status-dashboard-for-duet
Or any home automation that can carry out http requests.

Thank you so much for the info. Is there somewhere posted the instructions on how I could build my own version? I am actually just trying to remove some features. I know it sounds strange, but that is what I am trying to do.

thanks

@Phaedrux Right on man, thank you! Even if we can't accomplish what we're after, its nice to know I won't waste time trying lol. Macro will certainly suffice.

@Phaedrux said in DWC + PanelDue interfacing:

you can try testing the 3.2 bundle, or wait for final release.

Most likely will upgrade when the time comes for release!