Topics created by Paddy

@jay_s_uk Many thanks Jay

@OwenD said in Managed to mess up my config:

@Paddy
Update the wifi server
I seem to remember seeing that error during the upgrade (between uploading the three files - duet, DWC, Wifi)
The WiFi module firmware included here is version 2.1beta6.

Thanks. That sorted it. I had to erase my duet2 wifi as any wifi firmware newer than 1.27 wouldn't work. erasing everything and using bosso to get started got it sorted.

@Paddy That should be okay. For a list of Duet 2 WiFi/Ethernet pins and functions, see https://docs.duet3d.com/Duet3D_hardware/Duet_2_family/Duet_2_WiFi_Ethernet_Hardware_Overview#inputoutput

See also this thread where the Orbiter filament sensor is discussed: https://forum.duet3d.com/topic/34132/orbiter-filament-sensor-setup

Ian

@Paddy Yes, that's pretty much what the other thread describes. Perhaps get in contact with @daninet and work together to get it working? He's already started another thread about it, here: https://forum.duet3d.com/topic/34140/if-statement-for-macro-trigger-in-rrf

Ian

@oozeBot You are quite correct. I did look up the gcode dictionary but was too busy looking at the number to notice the letter had changed.

Many thanks!!!!

@Phaedrux Brilliant - that sorted it. I used the wifi server from 3.4.6.

Thanks again.

@Phaedrux Many thanks

@jay_s_uk Thanks for taking the time to reply Jay.

Many thanks Chris

Thanks guys.

@dc42 said in Wifi not connecting:

It might be worth measuring the voltage on the +3.3V rail, to see if it is within tolerance. The WiFi modules are fussier than other chips on the Duet WiFi about the supply voltage they get.

Is it the same ESP-12S module that we use on genuine Duets, or is it one of the older ESP-12 series modules?

It's the ESP-8266MOD.

It's been rock solid for a year before it played up. Now that it's working again and has been stable for the last couple of days, I'm reluctant to start poking around with a probe. It would be just like me to short it out.
If it plays up again I'll bear it in mind to check.

@Stockerbot Thanks, I will buy one to test it.

Seems to have sorted itself. I disconnected then reconnected the fan and its working how it should again.