Topics created by Fred-Y

@droftarts Thank Ian!
It works perfectly 🙂

@Fred-Y the version 4 have only recently started shipping, and we ran out of stock of version 3 a few weeks ago. So it's worth asking your local resellers if they have any on order.

@Fred-Y the Smart Effector version 4 has started shipping to resellers already, but some resellers may not have them yet.

@t3p3tony Excellent, thank you so much for these detailed instructions!
I will try first on an old damaged Smart Effector v2 to make sure I can do it 🙂

@dc42 Thank your for the prompt response!
I am really happy to have the confirmation this is moving forward, I am sure many of us are really impatient to have new features.

I think the CAN bus will be a great addition, I was thinking to rewire one of my delta to move all the electronic in the bottom with a toolboard as a relay on the top but I will just wait.

@dc42 Excellent!

The issue is gone on my 2 delta and on my CoreXY, first prints are fine - Thanks!
Fingers crossed 🙂

From my perspective, this thread can be flagged are resolved.

With the exception of the PID warning "heater behaviour was not consistent during tuning" which might be caused by my tick bed everything appears to know be fine with b7+1, from my perspective I think this issue can be marked as resolved.

@dc42 Thank you for the update, I started to be concerned that my board might be defective as I was the only one reporting this issue - I was close to test one from another printer or just buy another one.

Let me know if you have a pre-beta version you want to be validated, I can do it fairly quickly.

@dc42 I think this topic can be flagged as resolved, I did many small prints today and I have zero issue - Everything worked perfectly!

Thank you for the prompt fix!

@fred-y thanks for confirming.

I have been having the same problem with 3.4beta2, and just had it happen again on 3.4 beta3. I too am using a toolboard 1.1 with a v1.0 Duet3.

Thank you everyone, now I know what I need to get!

Next challenge find a seller in Canada that deliver to PO box 😲