FDM Printer w/Heated enclosure & Duet3D board?
-
Perhaps an @oozeBot would fit the bill?
-
@zemlin BCN3D uses 2.85mm filaments, so may not be interesting.
You might want to look into RailCore mini for a small, enclosed machine.
<>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>
-
@zemlin We'd love to talk to you about your needs! You might end up considering replacing those Raise3D machines with ours as well.
Full disclosure - we are a few weeks out from launching as we made the decision to upgrade to the new LGX Pro extruder (metal gears). As soon as those arrive, we'll begin taking orders.
Check out our (very wordy) pamphlet linked below for more info.
If interested, drop us an email at sales@oozebot.com. Thanks
-
@oliof said: BCN3D uses 2.85mm filaments, so may not be interesting.
Yeah - that's a deal-breaker. Thanks.
-
@zemlin Depending on your budget the VisionMiner IDEX22 / AddWise IDEX could be an option. Based on Duet board, IDEX, heated chamber, but not necessarily a small machine.
-
@oliof said in FDM Printer w/Heated enclosure & Duet3D board?:
@zemlin Depending on your budget the VisionMiner IDEX22 / AddWise IDEX could be an option. Based on Duet board, IDEX, heated chamber, but not necessarily a small machine.
Yeah - my space is limited for a 4th machine - but that looks like a decent rig. I could make it fit if I had to. Price tag is a little higher than I'm hoping for, but not out of reach if it's the right answer. Thanks.
-
-
Pics of the final test print before packing it up! Printed in ABS with.333mm layer height.
-
@oozebot you have Z banding there....
-
@tinchus no- that’s not z-banding.. that’s me opening the chambers doors multiple times during the print. We utilize a belt driven z-axis which glides on smooth rods.
