Duet 2 Wifi Random Resets
-
Yes that would be a good SD card choice. Be sure to format it as FAT32.
-
@mrawesome987 said in Duet 2 Wifi Random Resets:
I believe I am running a full size SD card in the PanelDue.
Do you mean to say you are using an SD card in the PanelDue to print from?
-
@phaedrux said in Duet 2 Wifi Random Resets:
Do you mean to say you are using an SD card in the PanelDue to print from?
I believe that is correct. I can check when I get home tonight, but I'm fairly certain I used a 16 or 32 gb card in the PanelDue to print from, since it was on hand.
-
Can you also compare uploading a gcode file to print directly to the SD card internal to the Duet and see if it still resets?
-
@phaedrux said in Duet 2 Wifi Random Resets:
Can you also compare uploading a gcode file to print directly to the SD card internal to the Duet and see if it still resets?
I will do this tonight. I also ordered a tool for the ferrules you recommended, just for peace of mind.
-
Ok, I was wrong. I am not using an SD card in the PanelDue, I was, however, using a no name brand SD card in the Duet. I have now followed the SD card setup instructions and used a different card (although still a no name 128mb one, until my new one gets here).
I am starting the print now, and will let you know what happens.
Thanks again for your help!
-
@mrawesome987 those no name 128mb ones that probably came with a BTT are only good for one thing ... throwing in the bin.
They ALWAYS cause trouble on the LPC/STM port of RRF -
@jay_s_uk said in Duet 2 Wifi Random Resets:
@mrawesome987 those no name 128mb ones that probably came with a BTT are only good for one thing ... throwing in the bin.
They ALWAYS cause trouble on the LPC/STM port of RRFGood news! The printer completed a print last night, it was about a 5-6 hour print. This is with the no name 128mb card, but I'll swap it out for the new one when it gets here.
On the card I had in the Duet prior, I tried the same exact print (same gcode) 3 or 4 times, and it failed within 2 hours every time.
I'll continue to test and update.
-
I got the new SD card yesterday and formatted it and copied my current file structure to it. Printed a bracket for my new printer build and it worked great. It was a fairly small print, only 3-4 hours, but it printed with no issues.
I guess this is resolved, unless it magically reappears later! Thanks for the help.
-
@mrawesome987 thanks for the update. I think the firmware must have been stuck in a loop in the Atmel/Microchip SD card driver waiting for the hardware to become ready; although in theory the transfer should time out instead.
