Print Frozen - RRF3.01-RC12 and DSF 2.2.0

jay_s_uk

Yea, I know there's a macro called that doesn't exist (prime.g).
I have successfully printed a variant on that gcode file with it making the calls to the macro and not had it crash.

I'll create a blank macro and see if I can get any further than layer 31.

mwwhited

If you need more scripts or confits to troubleshoot this issue my entire configuration is available here https://github.com/mwwhited/MyMashedDuet/tree/master/duet3/dsf/sd

mwwhited

BTW, I don’t know why but when running the debug console I can still access the webpage and ssh but crontab stopped running.

dc42

@mwwhited, I believe this is fixed in the new firmware binary at https://www.dropbox.com/sh/3azy1njy3ayjsbp/AACquxr2m00eV568RZg5QG5wa?dl=0. Please can you test it.

chrishamm

@jay_s_uk The fix will most likely resolve your problem, too. Please give it a try if you can.

jay_s_uk

@chrishamm

Great stuff. I'll give it a go

mwwhited

@dc42 How long should this update take to apply?

it's been saying "Please wait while updates are being installed... " for over 15 minutes.

mwwhited

I'm now getting "Timeout while waiting for transfer ready pin" when I try to start DuetControlServer in debug mode.

jay_s_uk

I got that when I installed both the expansion and main board updates. It started working again once I fully powered off the machine

dc42

It should be very quick, like any other firmware update. I suggest you try updating the firmware using Bossa instead.

mwwhited

Okay, I'm back up and running after wedging a USB cable into my controller (guess I should have left some more room to work with.) I'll let it run and let you know how it goes.

jay_s_uk

I've updated the firmware on my boards but not had chance to run a print yet. Too busy tweaking my tpre and tpost files.

mwwhited

I haven't seen any more issues today... but I'll continue to keep and eye on it.

-Thanks,
Matt

mwwhited

Didn't fix the issue. I was working on my toolhead scripts this morning and RPi froze.

chrishamm

@mwwhited Please try out the latest software bundle, there have been some more improvements since then. If you do see more freezes, please check the log of DCS (sudo journalctl -u duetcontrolserver -e).