Duet3D PCB delta printer effector sneak preview

dc42

The prices from the Duet3d web shop are now confirmed as follows, all excluding shipping and VAT where applicable:

Effector, carriage adapters, connector kit and heatsink £45

Accessories:

E3Dv6 hot end kit 12V or 24V less heatsink and temperature sensor £30
Thermistor temperature sensor £4.50
PT100 temperature sensor £12.50
Set of 6 Haydn Huntley 360mm arms with Delrin ends and 12 ball studs £65
Additional set of 12 ball studs £12

All the accessories are standard E3D or Haydn Huntley parts, so those outside the UK may prefer to obtain them from a local distributor.

Dougal1957

David

Any idea when we will be able to order them as they don't appear to be in the store yet.

Prices are more than reasonable IMHO.

Doug

Rommie

Yeah can't find where to order lol

MiR

Have been reloading the order page the last two days

DADIY

@dc42:

The prices from the Duet3d web shop are now confirmed as follows, all excluding shipping and VAT where applicable:

Effector, carriage adapters, connector kit and heatsink £45

Accessories:

E3Dv6 hot end kit 12V or 24V less heatsink and temperature sensor £30
Thermistor temperature sensor £4.50
PT100 temperature sensor £12.50
Set of 6 Haydn Huntley 360mm arms with Delrin ends and 12 ball studs £65
Additional set of 12 ball studs £12

All the accessories are standard E3D or Haydn Huntley parts, so those outside the UK may prefer to obtain them from a local distributor.

Hi David,

Any idea when we will be able to place orders?

loic

what kind of sensor does effector use for autobed?

dc42

@loic:

what kind of sensor does effector use for autobed?

It's a strain gauge that detects a minute flexing of the PCB.

Rommie

Any news when it's going on the store David?

Alexander Mundy

@dc42:

The prices from the Duet3d web shop are now confirmed as follows, all excluding shipping and VAT where applicable:

Effector, carriage adapters, connector kit and heatsink £45

Accessories:

E3Dv6 hot end kit 12V or 24V less heatsink and temperature sensor £30
Thermistor temperature sensor £4.50
PT100 temperature sensor £12.50
Set of 6 Haydn Huntley 360mm arms with Delrin ends and 12 ball studs £65
Additional set of 12 ball studs £12

All the accessories are standard E3D or Haydn Huntley parts, so those outside the UK may prefer to obtain them from a local distributor.

Is the effector populated including the strain gauges?

loic

what will be shipping price for eu?

Hergonoway

will you sell the set of Haydn Huntley's rod without the ballstud ?

dc42

@Alexander:

Is the effector populated including the strain gauges?

The effector PCB is fully populated and tested. You just need to mount the ball studs and hot end on it.

dc42

@Hergonoway:

will you sell the set of Haydn Huntley's rod without the ballstud ?

That's not up to me, but it's not planned. What are your reasons for wanting the rods without the ball studs, given that the effector and carriages are designed to suit the ball studs?

dc42

@Rommie:

Any news when it's going on the store David?

It will be in the store when it is in stock. I'm not involved with the web store, but I am told that making it available to pre-order would be an extra complication.

Rommie

Ahhhh ok, I'll have to keep checking the store

dc42

We'll make an announcement on this forum when they are in stock.

jannisj

Really looking forward to this

Will order everything I need as soon as the pcb kit is in stock Pcb kit, e3d hotend, duet ethernet, 5" paneldue.

Only missing heatbed, heatspreader, glass and zesty nimble

-Jannis

loic

does it possible to mount titan extruder on it?

dc42

@loic:

does it possible to mount titan extruder on it?

It's not designed for that. IMO a standard Titan would be too heavy for a delta anyway, it weighs about 260g. If you want to use a direct drive extruder on a delta, you need one with much smaller motor.

Dougal1957

@loic:

does it possible to mount titan extruder on it?

IMHO the best solution is the Zesty Nimble (27 grammes on the effector instead of over 200) the motor is remote mounted on the frame somewhere and transmits its power thru a cable/sleeve system pretty much like an older car Speedo drive cable using the correct adapter from either Shapeways or Thingiverse You can see photos of the set up on a previous page but i have posted some better ones here.

HTH Doug

edit links to adaptors added

Shapeways https://www.shapeways.com/product/62MB3QZJ7/nimble-mount-base-pcb-effector?optionId=62810434

Thingiverse https://www.thingiverse.com/thing:2453322