Duet3D PCB delta printer effector sneak preview
-
Thanks David for the reply! I might have to be extra careful.
I have ARC 15 MN carriage blocks. Here is the link:
https://www.dold-mechatronik.de/navi.php?a=45382⟨=eng -
I forgot to mention that the 26 mm square mounting holes are M4 in size instead of M3. So, I think only undrilled carriage adapter will work for me.
-
OpenBuilds precision V-Slot and Delrin rollers vs cheap Chinese linear rails? No thanks…
@CaLviNx:
Just go buy linear rails and enjoy the precision
Who said anything about buying cheap Chinese ?
I got genuine hinwin rails through work
http://www.hiwin.co.uk/product-category/linear-guideways/hg-series/
-
Any more news on a release date for these. Very interested in one
-
Looking like early next month.
-
Sweet is there any preorder going on??
-
Please count me in, now that I am back to Haydn's rods instead of tricklaser rods I am very interested, too….
-
Wow…I've just now noticed this topic. What a stunning design, I really love the concept!
Also, if you haven't already is there any chance you could work with the Zesty Nimble crew so they can design a mount for this new heatsink/effector arrangement?
Cheers!
Has already been done as long as the Hole system on the production Hot-ends don't change but the Zesty guys will be able to mod that in about 30 sec's flat I reckon Lykle came up with the adaptor in about 30 mins.
see https://www.shapeways.com/product/62MB3QZJ7/nimble-mount-base-new-effector?optionId=62810434
-
The hot end mounting hasn't changed. We managed to squeeze in 3 extra mounting holes in the production version, see https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer#Connectors_and_Wiring.
-
Will this be compatible with the upcoming Pico hybrid hotend or will it only work with the special e3d mount?
Would love to pair this with a pico hybrid and Zesty nimble cable extruder
-
It has a 12mm diameter hole in the centre for mounting the hot end.
-
David any idea when we will be able to order I am that impressed by the Beta that I will want to put a release one on the delta to take account of the changes that have been made?
Doug
-
We expect to have them available early next month.
-
Hmm…
No place for your IR z-probe device?
Frederick
-
Hmm…
No place for your IR z-probe device?
Frederick
That's because it has been superseded by an on-board nozzle contact sensor which doesn't care about bed type, material or colour.
-
@CaLviNx:
]
That's because it has been superseded by an on-board nozzle contact sensor which doesn't care about bed type, material or colour.
Thanks.
How does that work. The picture doesn't seem to provide that information.
Frederick
-
It's a secret until we start shipping them.
-
I can confirm however that it works and gives me deviations of less than 10b microns
-
hi what's the price's estimation for the whole set (carriage, sensor if sold separately, and effector) ?
-
I hope to make an announcement regarding price and availability soon.
I have updated the assembly instructions at https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer to cover programming the sensitivity of the nozzle contact probe using the new M672 command, and to reflect changes between the prototype and production effector.
