Unipolar/bipolar steppers.

dc42

Yes you should be able to use all of those motors.

Deluxe 600

Well i finally got to trying out the unipolar motors. I cant seem to make them work. Do i have to change something in the software side of things to make it work? So far the steppers just shake in one place.
Thank you for help

dc42

@Deluxe:

Well i finally got to trying out the unipolar motors. I cant seem to make them work. Do i have to change something in the software side of things to make it work? So far the steppers just shake in one place.
Thank you for help

That usually means the phases are not connected in the correct pairs. How have you connected them to the Duet?

Deluxe 600

Well i did it the same way as with the other bipolar steppers. But whatever combination i use doesnt seem to work.

Deluxe 600

And they worked fine. But the unipolar doesnt strangely. I have no experience with unipolars, i bought it by mistake but cant return it.

Dougal1957

this may help

https://www.circuitspecialists.com/blog/unipolar-stepper-motor-vs-bipolar-stepper-motors/

dc42

@Deluxe:

Well i did it the same way as with the other bipolar steppers. But whatever combination i use doesn't seem to work.

You haven't answered the question in a way that gives me enough information to make a suggestions. What I need is:

1. A link to the motor datasheet;

2. A photo of how you have connected them, or at least a description of the order in which you have connected the wires to the Duet's connector (assuming that the wires come straight from the motor, not from a connector on the motor).

Deluxe 600

Hello.
1.This is the link to the motors datasheet : https://www.ebay.com/itm/wantai-1pc-Nema17-Stepper-Motor-70OZ-IN-2-5A-42BYGHW811B-Dual-shaft-worldwide-/222067054625

2.I dont know how to add a photo but i did the wiring the same way as here: http://reprap.org/mediawiki/images/thumb/d/d7/Duet_0.8.5_Duex4_wiring_0.2.svg/640px-Duet_0.8.5_Duex4_wiring_0.2.svg.png

Motor just shakes in place but doesnt move.

dc42

The eBay link you gave is to a bipolar stepper motor, but you said that the problem you are having is with a unipolar motor.

Deluxe 600

Yeah i was mistaken. I did think it was unipolar, does that make it unusable?

dc42

Bipolar stepper motors are the correct sort to use. Suggestions:

Check that you have the wires in the correct order, i.e. black and green at one end of the connector, and red and blue at the other end;
Check that the crimp connections on the connectors are good, using a multimeter if you have one;
If the above checks pass, try a different motor output in case you have a blown driver.