Orbiter 1.5 and Duet3 6HC
-
Hello everyone,
I am in the process of converting my 3D printer (RatRig Vcore 3.1) to Duet.
However, I am currently failing because of the extruder, an Orbiter 1.5.Can anyone tell me how to wire it up? In other words, which colour from the motor has to go to which position in the connector?
Thanks in advance
-
@Classified that doesn't change between Klipper and Reprapfirmware. Keep the wiring order. if the stepper moves in the wrong direction, swap one phase, or invert the pin definition in config.g.
-
@Classified Will depend on who made the stepper motor. Mine an Orbitor V2.0 ( do not depend on this ) has a Moons Nema 14 with Black, Orange as one pair and Red, Blue as the other. And a spare motor is a LDO Nema 14 stepper motor with Yellow, Blue and Red, Green for colors. You will need to figure out who made your stepper, the part number then go to whoever made it and find the information.
Here is the info on the Moon stepper mine has with the wiring colors for the LDO.
Edit, I am assuming you no longer have the wiring in a connector. If you do it will remain the same as before.
-
@Classified for connecting stepper motors to Duet, see https://docs.duet3d.com/en/User_manual/Connecting_hardware/Motors_connecting
Ian
-
Trank YouTube this helped and the extruder works Fine
-
undefined dc42 marked this topic as a question
-
undefined dc42 has marked this topic as solved
