3.5.0-rc2: DWC&DSF dont upgrade from rc1

[CrazyCreator]

@jay_s_uk Now is later. and the e-mail is out ... but i have the same problem.

[jay_s_uk]

@CrazyCreator i take it you ran sudo apt update before trying to upgrade?

[CrazyCreator]

@jay_s_uk Yes ... Of course ... Is standard

Every time this way:

sudo apt-get update
sudo apt dist-upgrade

And a little hint:
I try to update the dwc with the dwc-zip-package per dwc-interface and the button "Upload System Files" ...
But doesn't work too.

[jay_s_uk]

@CrazyCreator that won't work.
And you probably shouldn't do dist-upgrade especially with the recent change to bookworm.
One for @chrishamm then

[Alex.cr]

Can confirm this issue as well. I have the same problem on my SBC setup. All boards upgraded to the new firmware but DWC and DSF are hung up on -rc1.

[Phaedrux]

Give it another try?

[Alex.cr]

@Phaedrux

Just did. Unfortunately no change.

[chrishamm]

@DavidG_68kg_PLA @CrazyCreator @Alex-cr Please try again now. It looks like I had only updated RRF on the unstable-3.5 package feed but not on the unstable feed.

[CrazyCreator]

@chrishamm
Now it works ... Thanks for the update

[DavidG_68kg_PLA]

@chrishamm
Thanks, works now!
...though it looked like and displayed Version 3.4.1 after the first start up