Extract temp to external display

tecno

I have menu and creates Display folder and files in it. Still no go

tecno

But does not show in left column ?

DIY-O-Sphere

@tecno
Put all menu files directy into menu folder. You don't need the subfolder display.

tecno

Done and still no go. Is M918 P2 enough to initialize the display?

DIY-O-Sphere

tecno

M918 P2 E4 R6

Done no diff, but when I turn the encoder board resets.

tecno

Tried another set of cables = no go

Is it maybe so that there is no firmware, if so what files do I need?

DIY-O-Sphere

@tecno
Maybe swapped wiring?
Check if EXP1 + EXP2 on board and the display are plugged in correctly.

DIY-O-Sphere

@tecno
This is what it looks like in my menu folder

tecno

Cables are inserted OK . My menu folder is like yours.

Did you ever load in FW in your display board?

DIY-O-Sphere

@tecno
I do not use this type of display, but maybe this will help. There are also versions (think from MKS) where the plug must be turned 180 ° .

tecno

Tried those settings also, next to be a pin detective and see if there is something in wireing.

Thanks for help, appreciated.

Will try more tomorrow.

tecno

Pinout seems to be OK.

Is this display 5V and not compatible with Mini5+ ?

tecno

Why is there no DISPLAY in the left menu?

DIY-O-Sphere

@tecno
It's under System. Have a look at the screenshot I have posted yesterday.

dc42

@tecno did you get it working?

tecno

Unfortunately no

tecno

Is there anybody out there (Pink Floyd) that can help me?

DIY-O-Sphere

@tecno
Can we have some picures of the wiring?

tecno

@DIY-O-Sphere
Std 10 pin cables Exp1 to Exp1 and Exp2 to Exp2