Loading Jobs in the Duet 2
-
In the Duet machine control page, I click “Jobs” and Click “Upload G code files”, the job appears to load, but it says no jobs?
I can click the “Upload and Start” button at the top of the page and that will load and start the job.
It was working fine yesterday.
Anyone ever see this before? -
@todd_r said in Loading Jobs in the Duet 2:
In the Duet machine control page, I click “Jobs” and Click “Upload G code files”, the job appears to load, but it says no jobs?
I can click the “Upload and Start” button at the top of the page and that will load and start the job.
It was working fine yesterday.
Anyone ever see this before?While I have never done that before I just tried it and it worked fine under firmware 3.4.
Did the files have the .gcode extension?
Frederick
-
What firmware and DWC version?
-
@phaedrux
And now it's working again. Glitch I guess? -
@todd_r if you upload a file other than in the DWC instance you are viewing (for example, using direct upload from a slicer, or using a difference instance of DWC) then you will need to press the Refresh button to see the new file(s). When you upload in DWC, that instance of DWC should show the new file immediately, although it may of course be off the page depending on what file sort option you have selected.
