closed loop nema 17/23 driver/controller for Duet 3 6hc board

[dc42]

@supertb1 we are testing with Nema 17 and Nema 34 steppers with built-in encoders from StepperOnline. Price will be higher than a tool board but I expect it to be lower than a 3HC. We will also offer an optional magnetic encoder + magnet to go on the back of a standard stepper motor.

[chernogorsky]

@dc42 set it to preorder somethere %-) willing to put some buks there

[MaxGyver]

@dc42

@dc42 said in closed loop nema 17/23 driver/controller for Duet 3 6hc board:

We will also offer an optional magnetic encoder + magnet to go on the back of a standard stepper motor.

This is amazing! I was already looking into ways to add encoders to my Bondtech LGX extruders. Thank you for your hard work!

[supertb1]

@chernogorsky I agree, I would be willing to put some money on this for pre-order.

[dc42]

https://twitter.com/Escher3D/status/1415953189145399297?s=20

[CNCModeller]

@dc42 all good progress. Looking forward to getting my hands on one!

[gregsaun]

@dc42 Awesome news, thank you and congrats to Louis as well!

[tristanryerparke]

@dc42 Hey David,
What kind of current rating are you thinking for these boards?
Tristan

[dc42]

@tristanryerparke said in closed loop nema 17/23 driver/controller for Duet 3 6hc board:

@dc42 Hey David,
What kind of current rating are you thinking for these boards?
Tristan

Up to 6.3A peak (4.5A RMS) @ up to 50V.

We have the new hardware prototypes running now.

[3DPMicro]

@dc42
I am adding cnc capabilities to a manual Lathe at work and was intending to use 2, 4'ish amp Closed loop Nema 23's from Stepperonline and a Duet 2 with expansion board for control. After reading this I would much rather use a MB6HC and the new expansion board. If I could get my hands on one of your new prototypes that would be great. Please let me know if you are interested in dedicating a board for cnc testing. I can be ready in as little as 3 weeks

[dc42]

@3dpmicro depending on what else you want to drive, it is may be that a Duet 3 Mini + the closed loop boards would be sufficient for your system.

[3DPMicro]

@dc42
Not much else. Spindle control at some point. I can see how the MB6HC would be a bit overkill for the application.

[supertb1]

@dc42 Hello dc42, it is that time of the month and I am as excited as I have been to take part in field testing the new closed loop controller and steppers. How close is Duet3D to coming to market? As always best regards.

[dc42]

@supertb1 we'll be starting the beta test phase shortly.

[martin7404]

@dc42 I am interested to test, willing to pay for the hardware

[supertb1]

@dc42 I'm with Martin7404

[Luke'sLaboratory]

@dc42

Sounds neat. What MCU do they use?

I'm definitely in for beta, if you're looking for volunteers. I have machines that are heavily EMF-limited at 325mm/s+, have stepper analyzers, and run 15k accel. I'll make sure they get the hot supper they deserve, and finally max out my Magnum+ with a .4mm nozzle.

Luke

[MaxGyver]

I have a professional IDEX printer prepared for closed loop with Nanotech motors featuring integrated encoders. Since all the cabling is already in place, only the closed loop controllers are missing... I would be very happy to support the beta testing.

-Max

[tristanryerparke]

@dc42 I would also like to join the beta crew, and would purchase several once everything is refined.
Thanks

[CNCModeller]

@dc42 said in closed loop nema 17/23 driver/controller for Duet 3 6hc board:

@supertb1 we'll be starting the beta test phase shortly.

Great news! I assume the intern? has had fun getting the code up and running

I'd be interested in taking part in the beta as well.

Looking forward to seeing how hard I can push the polar printer bed!