Missing paramters from this screen

PaulHew

Still struggling with this.

My M557 is

M557 X30:280 Y45:290 S20

but DWC displays this....

Not sure what is wrong here.
Have seen it with the correct parameters pre rc3.3.0 and once with RC3.3.0

P.

Phaedrux

Standalone or SBC?

If you send M557 what does it respond with?
What does your M557 look like in config.g?

PaulHew

@phaedrux Evening or maybe afternoon for you!

SBC
m557
Grid: X30.0:280.0, Y45.0:290.0, radius -1.0, X spacing 20.0, Y spacing 20.0, 169 points

; Z-Probe - ToolBoard 1LC
M950 S0 C"20.io0.out"                           ; create servo pin 0 for BLTouch
M558 P9 C"^20.io0.in" H5 F120 T6000             ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X-7 Y35 Z0.941 ;1.242     ;0.952                            ; set Z probe trigger value, offset and trigger height
M557 X30:280 Y45:290 S20

Regards,

Paul

Phaedrux

Did you ever get the other errors you were seeing solved from your other thread?

https://forum.duet3d.com/topic/23807/bed-mesh-parameters-missing-and-the-return-of-errors/8?_=1624572210658

Did you enable monitoring?

o_lampe

@paulhew said in Missing paramters from this screen:

Not sure what is wrong here.

Would refreshing your browser help? {F5}

Phaedrux

@PaulHew https://forum.duet3d.com/topic/23893/define-area-for-mesh-compensation-missing

Seems to be a bug.

PaulHew

@phaedrux No I did not enable monitoring, I have not been back to that thread until today.

I wont post 2 issues in the same post next time!

@o_lampe Did try that but did not solve anything, even shut firefox down and reopened.
As per the other post, it gave me the correct parameters once.....

Just read the link. Yep, bug.

P.

dc42

This bug has now been fixed in the RRF 3.4 source code.