help for beginners

sergei

I understand correctly . Editing inscriptions in Russian. Then what should be done?

droftarts

@sergei Probably the easiest thing to do is create an account on github, clone the repository that holds the file @dc42 linked above, edit it in a text editor (copy the English section, edit the words to Russian, then paste it back in as a new section), then submit your new version of this file back to github as a 'pull request'. For example, here is the Italian translation pull request: https://github.com/Duet3D/PanelDueFirmware/pull/91

This is how most open source projects work, if you want to get involved it's worth learning.

Ian

brisma opened this pull request in Duet3D/PanelDueFirmware

closed Added italian translation #91

sergei

Thanks for the advice. I will try now

droftarts

@sergei If you want to test it, you'll need to compile your new version of the firmware in Eclipse. This is... not easy to set up. See the instructions here:

You will need Projects PanelDue (from the PanelDueFirmware repo, master branch https://github.com/Duet3D/PanelDueFirmware/tree/master) and RRFLibraries (dev branch https://github.com/Duet3D/RRFLibraries/tree/3.3-dev).

I suggest you start a new thread if you want support getting this working, in the PanelDue category.

Ian

sergei

if I throw off the finished file with the Russian language for you, you can make the firmware for the screen 4.3

droftarts

@sergei It won't be included until the next release. At the moment, I don't think there is any development going on, and no release is planned, so it may be some time before it gets included.

Unfortunately, I don't have the development environment set up (I'm not a programmer), so I can't compile it for you.

Ian

dc42

I can probably find time to integrate your translation and produce a binary for you to test.

sergei

that would be very good. if you do it

mfs12

Hey @sergei, i would like to integrate the russian translation, can you send it to me?

sergei

Yes. you need a file called Strings.hpp ?

mfs12

@sergei if you have it, this would be the easiest.

sergei

Yes, I have it ready. you just need to build the firmware. Will you send me the finished one later?

mfs12

@sergei not sure if i will make it today.

which device do you have?

did you do a pull request on github? or how can you provide the file?

sergei

I have a touch screen panel duet 4.3

sergei

send your mail. i will send you a file

mfs12

please upload it here. don't wanna post my email address publicly.

sergei

this file format is not loaded here. it is not supported

droftarts

@sergei put .txt on the end, it should upload.

Ian

engikeneer

@sergei just rename it to .zip and upload it here. Anyone who downloads it can just rename it back to .hpp to use

EDIT: looks like @droftarts beat me to it

sergei

не получается отправить . не даёт это сделать