All Drivers give me disconnected reported by driver

DruckKlaus

Hey there,
i got my Duet 1.03 Wifi form a friend a few days ago and now trying to get it to run.
The problem is all Drivers report :
"Warning: motor phase A may be disconnected reported by driver(s)
Warning: motor phase B may be disconnected reported by driver(s)"
when i try to move them.
Iam running "RepRapFirmware for Duet 2 WiFi/Ethernet version 2.04"
I tested everything from changing Motors to changing the connections from AABB to ABAB and BAAB.
nothing is working.

M112:
M112.txt

config:
config.g

json:
json.txt

Maybe i flashed it wrong or something ? Can any1 help me pls?

Phaedrux

Chances are the error message is telling you exactly what's wrong. The motor phases are incorrect.

First you should identify the motor phase pairs and wire them accordingly.

https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors#Section_Identifying_the_stepper_motor_phases

If you've identified the pairs and are sure you have them wired correctly you can do further troubleshooting.

DruckKlaus

Ofc i did. As said i first did it like it is supposed to be. It didnt work. And then i tried like everything else possible.

Phaedrux

Does it still report the error on all drivers with only 1 motor connected?

DruckKlaus

Short answer is: it reports it anytime. Dont matter if something is connected or not.

Phaedrux

Did it work correctly for your friend before they gave it to you?

DruckKlaus

atleast he said i did. he is trustworthy. thats the only reason i try to get it to run and not discard it already.

Phaedrux

What are the specs of the motors you're trying to use?

DruckKlaus

@Phaedrux said in All Drivers give me disconnected reported by driver:

What are the specs of the motors you're trying to use?

https://cdn-reichelt.de/documents/datenblatt/X200/17HM5424DATASHEET.pdf

Veti

M906 X1400 Y1400 Z1400

you are running 0.8A motors with 1.4A.

DruckKlaus

@Veti theyx running fine on this current. on the back, they got written 2.4A. Before i run them also with 1.4 and all was fine. they are pretty beefy

Veti

then you posted the wrong spec sheet.

do you have a motor of different make that you can test?

DruckKlaus

@Veti said in All Drivers give me disconnected reported by driver:

then you posted the wrong spec sheet.

do you have a motor of different make that you can test?

y tested and the same issue

DruckKlaus

Veti

can you measure the resistance between the red and blue wire and between the green and black wire?

DruckKlaus

1.3ohm between each

Veti

can you post a picture of the motor connection on the duet?

DruckKlaus

ofc, i dont lnow why but ofc

DruckKlaus

DruckKlaus

@T3P3Tony u may got any idea ?