@Fvanp said in G codes not uploading to duet wifi:

@jay_s_uk It is indeed my wifi, I tried it near the router and it worked fine. So I think I have to buy a wifi repeater. Thank you for your help sir.

You may find that changing the WiFi channel used by the router helps.

@tusbube said in Mastro and Ethernet connection to Freebox router:

Yet the Ethernet LED stay OFF

would sugget there is something wrong with the cable and/or the Duet and the router is unable to negotate a link. If the router support forcing a link speed or duplex setting that might be worth a try.

@bearer I was just trying to point out that is something needed for some scenario, in any way, even if we are in our own private network. There is no need to "reinvent the wheel".

@CaLviNx

https://dictionary.cambridge.org/dictionary/english/nitpicker

Thanks now the world is saved.

English is not my first nor my second language.

Worked a charm, thanks!

@CCS86 This limit has been defined because at a certain size the HTML textarea becomes too slow to work with. We might be able to remove that once the new G-code editor from the pending DWC PR has been merged.

Thanks !

Thanks @dc42 and @chrishamm

We now have a functioning homing system

Appreciate you help

and...@SputnikOC3d - thank you too dude!!!

Cheers

Ray

@chrishamm clearing the cache solved the issue on my rpi as well - thanks.

Thank you for your help
is not your problem !!
such a good support THANKS

Oh, i see. I always keep the duet tab opened and pinned so i guess I have never had it change.

Any possibility of showing the camera feed on the new DWC2 status page?

No Problem, it was me who did not take time to test everything in a straigh process.

@Stephenbright said in Nozzle fan not blowing above 50%:

Is this the latest firmware version for 2.xx
2.05 (2019-12-13b1)

https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1

Please update to the 3.01 full release and see if you still have issues.

@zapta said in DWC doesn't show properly a partial mesh scan area.:

Does DWC2 work with RRF 2x? Is it recommended?

Yes DWC2.0.7 onward works with 2.05.1

DWC1 is no longer being developed.

Can you send M114 over Telnet when you want the position?

Terminates 2 and executes only 6 is what I'm looking for yes.