Yeah back up and working. Apologies, turns out the maintenance mode page was the pre-launch page. sorted now I hope

Currently, M999 or Emergency Stop from PanelDue is not immediate in the case that you have sent a command from PanelDue that has not completed.

@bot:

Wow… also the ability to comment on individual steps. Whatever that is, I'm sold.

I was just going to suggest exactly that - great to know there's already a solution. The ability to easily give feedback as you're following directions should very quickly highlight what areas need what improvements.

@frafa:

sorry i dont have solidworks
export .dae http://www.openhardware.eu/tmp/paneldue.dae
or .png http://www.openhardware.eu/tmp/paneldue.png …
http://www.openhardware.eu/tmp/paneldue.png

These dimensions are incorrect. Where did you get these?

For example, the longest PCB mount dimension is 127.5, not 129. The shorter PCB mount dimension is 78.5, not 78.00.

I know it's not a Meanwell PSU so I won't expect the same performance.
Tested it under motor load and the oscilation is practically none. Yes…. with this cheap multimeter. It's not the best way but I can't afford an oscilloscope or a more professional calibrated multimeter.

My concern was if I had to ask for a refund/return or to confirm the transaction.
I've already did the last one.

Thank you all for the help and have a nice weekend.
I will for sure stay at home nerding with the CoreXY build 😛

Hi im thinking to build a CNC CO2 laser, and because i already have a duet it would be nice if i can use a duet for this machine to.

Laser cutting should not be a problem, but how to engraving in raster mode with the duet.

merlin uses G7 to execute a raster line ( base64 encoded line ) and i think there is a inkscape plugin to generate the g-code for merlin.

Just a friendly update. Replacement board got here, Runs great now 🙂 absolutely in love.

I am running two supplies with this http://amzn.to/2yfb19c to send power from the largest PSU to the bed. Been working great. I bought two more and installed on another printer I have for poor manufacturing reasons.

No worries, glad to be of assistance and hopefully the explanation on the page is clearer now.

Feel free to start a thread in the smart effector section. It will be interesting to see how many people would want one (and which cyclops, the regular one or the u and coming water cooled one? 😄

Issue is resolved, was something strange going on in my slicer(s) with sphere prints. Not sure what all contributes, but it was having 4 perimeters + 4 bottom layers. I lowered that to 3 perimeter, 2 bottom layers, and they print beautifully. Worked to resolve it in both s3d & slic3r.

As for the steppers, I did lower the currents a tad from where they were. Didn't have to be 50%, but did have to go down some.

Ah I see, I didn't think of the fact that your unit is for controlling a setup where the bed and the rest are powered from one PSU.

In my case my bed is powered from mains, so my safety processor would need to sit before the bed and the printer plug.

Try https://grabcad.com/library/duet-ethernet-1

I'm sorry, I lost track of this thread during the TCT show. I have it on my todo list for next week to look at your Wireshark trace.

Just a tangent from this, my chamber heater reported a fault as it wasn't heating as fast as expected, this killed the print, when perhaps for an accessory heater like this, an arguably better behaviour would be to shut down that heater and continue printing as there is still a possibility of a successful print, or indeed pause.

Also are there any plans to have a system where faults could be notified to the user by email?

It depends on how and where you have mounted the Duet. See https://duet3d.com/wiki/WiFi_disconnections_and_AJAX_timeout_errors.

I definitely did an autocalibration, but I'm logging now so I will check. Yes I homed in resurrect-prologue.

The changes in 3. sound great, I the meantime I'm going to go scavenging for large capacitors.

If the Tx and Rx lines are reversed, I would not expect to get backlight only - I would expect to get a normal screen but no status to be received. I am surprised if you saw something different.

Cf

From left to right :

0
0.2
0.4
0.4 with jerk doubled (10 -> 20mm.s⁻²)

The in/out angle is the top right.

Great, thanks!