Topics created by seeul8er

@fcwilt I checked and you are right. The heater state is consistent. The tool state can then be ignored. I see no benefit for now

I think your XY rails are not in the same plane.

Frederick

@dc42 said in Object model to report two decimal places for axes:

Although the value is displayed to 1 decimal place, it is stored to a greater precision. You can see this if you enter:

echo move.axes[2].max+0.000001

However, I will increase the number of decimal places reported for axis minima and maxima by M409 to 2 in release 3.1.1.

.

Will the reported accuracy be added across the board?
I noted some rounding when I was doing that macro to add baby steps to the current trigger height.
Trigger height in config.g was to 3 decimals as reported when using G30, but when added to baby steps & saved it was 2 decimals.
Didn’t know you could add how many decimals you want returned, but would be better not to have to.

EDIT: Realized after posting, that your demo was just forcing the return of a string with that level of decimal places, by addition, not a format parameter denoting number of decimals.
Where's the face palm emoji?

@oliof and all the others:

Release 1.4.0 is out now!
Changelog:

Added file info information when long-pressing a job on the job selection list Added print bed temperature to header Fixed crashes when a user does not click the button of a dialog, but the dialog box fixed filament length parsing fixed UART parser errors fixed simulation time parsing errors fixed error when no Duet password is specified

Get it here: https://github.com/seeul8er/RepPanel_ESP32/releases/tag/v1.4.0

@taconite They got a min. length for the extrusions. Apart from that I see no reason why low quantities should be a problem.

For laser & bent parts my goto is https://laserteileonline.de/. Found them to be cheapest of all (that sell to private persons). The online configurator is nice.