Topics created by paralepsis

Hi, I'm having the same problem, except I'm stuck in a reconnecting / /connected / disconnected loop. Refreshing or closing firefox , and deleting all sites data , doesn't work.
It happens after a somehow long operating time (~ 2 weeks)

Irecently upgraded everything to 3.5.3

@paralepsis documentation of the object limits is a good idea, one for @droftarts

@paralepsis to turn it off, yes, thats what i use

@Sindarius sure!
heightmap.csv

@dc42 Finally got around to re-routing the cable, can confirm that fixed this problem. Just thought I'd post in case someone finds this thread relevant. Thanks again!

@paralepsis works great!

@StevenL said in PanelDue 7i firmware update: What should I expect?:

I've got TWO of the same 7i panel. One for my Railcore ZL and another the ZLT.
Can you list the steps to do this upgrade?

These steps? https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_PanelDue

@jay_s_uk Thanks!

@chrishamm Yes, I think that might be the magic I'm looking for; thanks!!

@jay_s_uk Thanks so much!

@zapta Thanks!

@dc42 Got it, thanks!

@tmicke Thanks! Good luck!

I'm trying to avoid having my fan spuriously controlled during prints. I think the right thing is for me to just not use fan 0 but rather to define that fan to another "position" so that it doesn't matter.

@paralepsis I think you can achieve that by not creating fan number 0, i.e. do not use a M950 H0 command; or if you want o be explicit, use M950 F0 C"nil".

@dc42 Got it, thanks again!

@paralepsis The AP died, how did you handle it? Did you get a replacement from Duet, or ...?

Hacked up something to cover the missing regions, stitched together by hand. Probably not interpolation. Thanks again.

@paralepsis Screen Shot 2020-12-22 at 2.11.44 PM.png

[ I also tweaked the probe Z height in here, which is obvious when comparing the two heightmaps. ]

@chrishamm so I guess something like this?

echo "Stall detected:" echo " Current position:", move.axes[0].letter, move.axes[0].userPosition, move.axes[1].letter, move.axes[1].userPosition echo " Current object:", job.build.currentObject echo "Rehoming and resuming." G28 X Y