Topics created by Loris

@phaedrux said in Toolboard 1.1 - Driver not present:

Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.

Done. Thanks

@loris https://wiki.fysetc.com/BIQU12864_On_Spider/

rotate both connector 180 degrees and swap them if this not works...

@engikeneer Thanks

@loris it's only needed for calibration.

@Loris

you can use a raspberry pi and map the sd card folder in any way that you like.

You could try putting capacitor on SSR input.