Best posts made by jamaicarasta

@jay_s_uk
ok i will check that i took a config from the internet from the beginning and maybe the value there is wrong for my probe

@jay_s_uk
Ah ok. Xmotor1:motor2:motor3:motor4 Ymotor1:motor2:motor3:motor4
You are my hero
I hope I can ask you a few more questions in the near future. I still have a few things I don't quite understand.

@jay_s_uk Thanks i will try it

@jay_s_uk ok
I will try M593 P"MZV" F41 and make a test print.

@jay_s_uk Thanks for your help man, now the Test print. That was the Print yesterday without shaper. 100mm/s and 7000accel. Not bad with 7000accel. Voron 350 with lgx lite and carbon x axis and 1 mgn12 rail.