Topics created by Hobby-Store

@owend said in Stopping a printing job after a warning or error:

@hobby-store said in Stopping a printing job after a warning or error:

Only that it does not even inform anymore after the upgrade to 3.4

In 3.3 there were notifications in the log

I can use own driver-warning.g and pause printing?? Have I understood the documentation correctly?
By default when it's not create this file is default is Inform user via console and continue

If you want to pause on a warning, then yes, you need driver-warning,g
@DC42 would have to confirm what waning/error disconnecting a stepper completely would cause as opposed to loss of a single wire by breakage.

Ok i must check with this files and back with informations 😉 Thx

Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.

@dc42 in my case it could also be pet hamster related... 😅

most likely he forgot to update the duet web control

Change your terminal settings to capture the full output of M122 after trying to move the E0 driver with Vin applied as was requested

I think this has some notes on the termina settings if using YAT https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

Ok, thanks for the help 😄