Posts made by Great_Thark

Thanks Stephen but I'm in the uk. I just had to pay a small fortune for an ssr from a reliable source (rs components) I figured in the long run it was cheaper than potentially buying fakes and having to replace.

I'm running mixed voltages. 18v on bed (makes it fast enough but self limits at about 130/140) pulls about 18A cold and 12v on the rest. Currently using mech relay so bang bang only until I add ssr. If anyone can suggest a reliable source it would be appreciated.

Thank you to dc for all the work and still managing to find time to answer questions on here

Thank you. I guess i need to order that ssr. Trying to find one in the uk i know is decent without paying a fortune is taxing though

Forgive me if I've missed something obvious.
Need some help please

I'm having the occasional bed fail error. Temp not rising fast enough is the only one i have seen, but I did get an error early in a print when I was stepping from 110 on first layer 100 2nd 90 3rd.

It's a rostock max so bed has a fair bit of thermal inertia.

Running bang bang

What sets timing / behaviour for timeout. Tbh i could disable error on bed, running 18v it peaks at about 140 so wont set anything alight.

I'm now looking for quieter cooling fans if that tells you anything. The difference is massive.

Order 248. Black on blue would be fine with me if it stops delays, even better if it moves me up the queue

b c j o h in no particular order