Thanks Stephen but I'm in the uk. I just had to pay a small fortune for an ssr from a reliable source (rs components) I figured in the long run it was cheaper than potentially buying fakes and having to replace.
Latest posts made by Great_Thark
-
RE: Bed heater error
-
RE: Bed heater error
I'm running mixed voltages. 18v on bed (makes it fast enough but self limits at about 130/140) pulls about 18A cold and 12v on the rest. Currently using mech relay so bang bang only until I add ssr. If anyone can suggest a reliable source it would be appreciated.
Thank you to dc for all the work and still managing to find time to answer questions on here
-
RE: Bed heater error
Thank you. I guess i need to order that ssr. Trying to find one in the uk i know is decent without paying a fortune is taxing though
-
Bed heater error
Forgive me if I've missed something obvious.
Need some help pleaseI'm having the occasional bed fail error. Temp not rising fast enough is the only one i have seen, but I did get an error early in a print when I was stepping from 110 on first layer 100 2nd 90 3rd.
It's a rostock max so bed has a fair bit of thermal inertia.
Running bang bang
What sets timing / behaviour for timeout. Tbh i could disable error on bed, running 18v it peaks at about 140 so wont set anything alight.
-
RE: Noise comparision between 0.8.5 and wifi version ?
I'm now looking for quieter cooling fans if that tells you anything. The difference is massive.
-
RE: Black on Blue Silkscreen - Delay
Order 248. Black on blue would be fine with me if it stops delays, even better if it moves me up the queue
-
RE: Duet WiFi firmware new feature priorities
b c j o h in no particular order