Fan 2 (P2) percentage on Dashboard
-
Hey,
does anybody know how I can get to see the % Setting of FAN 2 on the Dashboard or Current Job-Status overview?
Thx
-
If i remember correctly (someone can correct me if i am wrong
), then fans with thermostatic contol doesnt show up in DWC. So if you want to see fan control and status you should disable thermostatic control (with H-1 parameter in M106 command). -
That's correct. Thermostatic controlled fans are controlled by the temperature of the configured heater. Allowing it to be overridden by the slider could be detrimental. (turning off the hotend fan during a print for example.)
More detail on fan control:
https://duet3d.dozuki.com/Wiki/GCode#Section_M106_Fan_On -
Hey,
thx for the tips.
I found in the DWC instructions also an additional information.
Not named Fans/Heaters won't display either.
By using M305 a name can be assigned...will have to try that one.In this case it is just for information, to see if my board cooling fan is turned on or not...
Have a nice Sunday.
-
Fans can be named too (sere the M106 link above), but I don't know whether named fans are displayed in DWC2 when they are thermostatically controlled.
