Testin Mini Height Sensor

[peirof]

Hi,

i am triying IR Height Sensor... and 80% of assembly and configuration, ok... but when start to do test, after send:

-G30 S-1

the head go down a few, and this error message in console...

9:12:27 Error: Invalid servo index 3 in M280 command
9:12:26 G28 Error: Invalid servo index 3 in M280 command

I have to say, i was installed BlTouch in Heater3....

why this error?

thanks

[dc42]

You still have the deployprobe.g and retractprobe.g files that you set up for BLTouch. Either delete them, or comment out the M280 commands in them by inserting a semicolon at the start of the line.

[peirof]

Hi,

YES... This was