Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 Spindle control

    Scheduled Pinned Locked Moved
    CNC
    3
    3
    199
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • peteupshallundefined
      peteupshall
      last edited by

      I am looking to achieve spindle on/off and speed control via my Duet 3.
      I have a VFD & 1.5Kw spindle.
      Can anyone advise what steps are necessary to achieve this please.
      I have a PMW 1-10volt converter by me but do I also need some sort of relay control, config.g changes and post processor changes?
      I am using RRF 3.3 and Vectric aspire.
      TIA

      dc42undefined 1 Reply Last reply Reply Quote 0
      • Nightowlundefined
        Nightowl
        last edited by Nightowl

        Here's a link you can check out. It should help.

        And a useful thread.

        Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
        I'm still on my learning curve, so take everything I say with caution!

        RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators @peteupshall
          last edited by

          @peteupshall also read https://docs.duet3d.com/User_manual/Machine_configuration/Configuration_CNC#connecting-a-spindle.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA