G53 vs G54 issue
-
Any update on the fix for this issue. I keep checking for updates on the reprap GitHub but no new releases since November. Thanks.
-
@baird1fa this should be addressed when rc1 is released.
-
@sindarius Looks like it isn't fixed in the RC1 release. Is there a work around other than putting it in FFF mode? That seems to prevent some Gcodes from working like the spindle start for instance.
-
@baird1fa I cannot confirm this, it works as expected on my setup. Please check on the Settings -> General page that you are using 3.4-rc1 and press Ctrl+Shift+R if this is not the case to force-reload DWC.
-
@chrishamm My Bad I forgot to update the DWC and only updated the firmware. Thanks for the help.
-
undefined dc42 has marked this topic as solved
