Tool board Accelerometer

[dc42]

@dhusolo try using firmware 3.4.0beta5 and the input shaping plugin instead of the accelerometer plugin.

[dhusolo]

@dc42 Are you referring to this plugin?

[jay_s_uk]

@dhusolo yes, that one

[dhusolo]

@jay_s_uk And do install it copy the files and overwrite what's on the SD card or upload the ZIP directly into DWC?

[jay_s_uk]

@dhusolo upload the zip directly to the system tab in DWC

[dhusolo]

@jay_s_uk Perfect thanks. I'll give it a shot when I get home from work

[dhusolo]

I just ran it again with the input shaper plugin. I'm not really sure how to use the data to config input shaping.

[dc42]

@dhusolo your machine appears to have a large but fairly narrow resonance at about 49Hz on that axis. I suggest you try a ZVD shaper centred on that frequency.

[dhusolo]

@dc42 So M593 P"zvd" F49.0?
Should I disable Pressure Advance? Currently it's set at M572 D0 S0.040

[dc42]

@dhusolo you can leave PA enabled but you may need to adjust the amount for best results.