Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    NC Limit Switches

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    4
    214
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Hayden1993undefined
      Hayden1993
      last edited by

      Just about to add my limit switches on my CNC (X, Y, Z)

      I've read a fair bit online and it seems better/safer to wire them as NC instead of NO?

      Can I also confirm I'm wiring them correctly on my Duet3 6CH board

      I0_1/2/3

      3.3V = NC
      GND = Gnd

      Hayden

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @Hayden1993
        last edited by

        @hayden1993

        Yes NC is better.

        That way the two wires are shorted together thus making interference from another source of electrical noise very unlikely.

        You want to connect the switch NC connection to the board I/O GND and the switch COMMON connection to the board I/O io#.in connection.

        Configure the input for active high.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        Hayden1993undefined 1 Reply Last reply Reply Quote 0
        • Hayden1993undefined
          Hayden1993 @fcwilt
          last edited by

          @fcwilt much appreciated, thank you

          droftartsundefined 1 Reply Last reply Reply Quote 0
          • droftartsundefined
            droftarts administrators @Hayden1993
            last edited by

            @hayden1993 See https://duet3d.dozuki.com/Wiki/Connecting_endstop_switches#Section_Microswitch

            Ian

            TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA