M291 S3 in homez.g results in error messages

[elbgrd]

@phaedrux Any other ideas?

[Phaedrux]

Under investigation as a possible bug.

[dc42]

@mikeabuilder and @elbgrd , please specify whether you are running in standalone mode or SBC mode, because that might make a difference. @mikeabuilder, please also tell us what firmware version you are using.

[elbgrd]

@dc42 Standalone mode.

[benecito]

@dc42
I have the exact same problem running a 3 mini on 3.3 in SBC mode.

[benecito]

Any updates on this?

[Phaedrux]

@benecito Not as of yet.

[benecito]

@phaedrux But from the above I take it is not supposed to be like that? So I can expect a future update to fix this? Or do I need to look for another way to work my way trough homing?

[Phaedrux]

@benecito In the meantime you may need to seek a workaround yes, but hopefully not forever.

[mikeabuilder]

@dc42 - So sorry for starting this thread then going silent. I thought I had it set to email me when there were replies (newbie error).

I'm running a Duet2 clone board and have the RR3.3 firmware running. I'm not near the machine now so I can't look for a more detailed version number, but I downloaded mine at the end of June.

My homez.g is attached and you'll see I don't have an M292 in it, just the M291. homez.g Apologies fr the extraneous comment lines at the end. They are a leftover from the file when I inherited it.

And I'm running standalone. And I've tried this with web control and also PanelDue. I get the error messages on both.