How to leave hotend and bed on after Pause->Cancel

Eddiie

Hi,

I am not sure if this is different from the WebUI as it is from the Paneldue but when pausing a print job from the PanelDue Print screen then Cancelling the job, the hotend and bed both start to cool down. How to make them stay on after a cancelled job? I cancel many times before a job looks like it is going to work.
Waiting for reheating is frustrating.

Here is my default (?) pause.g

[[language]]
; Pause macro file
M83					; relative extruder moves
G1 E-4 F2500		; retract 4mm
G91					; relative moves
G1 Z5 F5000			; raise nozzle 2mm
G90					; absolute moves
G1 X0 Y85 F5000		; move head out of the way of the print

dc42

You can keep them on by creating a cancel.g file in /sys. This file will be executed when you pause and then cancel a print. If the file is not found then the default action is to turn the heaters off.

Eddiie

cancel.g of course!

Thank you.