Duet 3 CAN and external motor drives

[dc42]

The CAN connected external driver interface board is in production and we have stock.

The closed loop board is still in prototype stage.

[JuJuDelta]

Hi David,

Who should I contact to purchase one of these, or at least get my name on a list ?
I am working with a client who needs to drive some powerful external drives.

Thanks & Regards,

Julian.

[patrick802]

Hi David,
The Duet 3 expansion board doesn't appear to have any logic level connections for step and dir outputs. Are you referring to a different board?

Best Regards,
Patrick

[Veti]

@JuJuDelta said in Duet 3 CAN and external motor drives:

Who should I contact to purchase one of these, or at least get my name on a list ?

https://www.duet3d.com/Duet3Expansion1XD

[T3P3Tony]

Drop me a line, info@duet3d.com

We only just got them in so our resellers have not had a chance to stock them yet.

[patrick802]

@Veti The link to the documentation points at the tool board. Could you send me a link to that board?

Thanks,
Patrick

[Veti]

@patrick802
there is no documentation site yet.
@T3P3Tony can you correct the link on the duet store page?

[Rushmere3D]

@patrick802

https://duet3d.dozuki.com/Wiki/Duet_3_Expansion_1XD

[Veti]

@Rushmere3D
good catch

[patrick802]

@Rushmere3D
thanks very much. I guess I need 3 of those boards to start with.

[patrick802]

@Rushmere3D
The reseller links need to be fixed. I am trying to order 3 of them.

[Veti]

@patrick802
see the post by @T3P3Tony