incompatible firmware v on duet3?
-
@Martin1454 said in incompatible firmware v on duet3?:
3.0beta12
please update to 3.1.1
you need to update to 3.0 first
see
https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0 -
may be helpful https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3#Section_Updating_Duet_3_from_RRF3_0_Beta_12_to_3_0_Final_via_DWC
-
Ah! thanks you guys, i'll give that a try!
-
@bearer
So i tried the DWC way shown in your link - but
the DWC interface have been stuck on "Please wait while updates are being installed..." for +24hours -What to do? I dont wanna risk bricking it by power cycling if thats a chance
-
@Martin1454 said in incompatible firmware v on duet3?:
I dont wanna risk bricking it
you can always recover using USB and bossa (unless something is damaged, the bootloader is in read only memory in the cpu)
update taking more than a minute or so has failed so you can reset the board, and if you're unable to connect refer to https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_3 just make sure to get the duet3 firmware file as the guide is written for duet 2.
-
@Martin1454 said in incompatible firmware v on duet3?:
the DWC interface have been stuck on "Please wait while updates are being installed..." for +24hours -
Give it a power cycle. You can't really brick it. Power back up and see if the update was applied. If not, try uploading the zip file again.
Make sure you're uploading the entire zip file without extracting it.
If it continues to fail, what version are you currently on? What version of DWC does it show?
-
Duet Web Control 3.1.1
DSF Version: 3.1.1note that I am using the Duet 3 with an RPI - And I have tried the sudo apt-update and upgrade - But I still get 3.1.1 / the message "duetsoftwareframework is already the newest version (3.1.1)." - Is there something I can do to downgrade to 3.0 first and then back up?
-
Your best options are to upgrade the main firmware using Bossa, or to run the Duet in standalone mode with a USB connection and install the latest firmware from the SD card. Upgrading to 3.0 first isn't essential on the Duet 3.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 said in incompatible firmware v on duet3?:
Your best options are to upgrade the main firmware using Bossa, or to run the Duet in standalone mode with a USB connection and install the latest firmware from the SD card. Upgrading to 3.0 first isn't essential on the Duet 3.
What would you reccomend to upgrade to then?
-
@Martin1454 said in incompatible firmware v on duet3?:
@dc42 said in incompatible firmware v on duet3?:
Your best options are to upgrade the main firmware using Bossa, or to run the Duet in standalone mode with a USB connection and install the latest firmware from the SD card. Upgrading to 3.0 first isn't essential on the Duet 3.
What would you reccomend to upgrade to then?
3.1.1 to bring it into line with the version of DSF on your Pi.
