Big box with Duet 2 Ethernet and 7" PanelDue for sale

fcwilt

@Kayjay said in Big box with Duet 2 Ethernet and 7" PanelDue for sale:

The only reason I'm selling is because I'm selling my house and moving onto a narrowboat so 3d printing is dead in the water so to speak.

Moving just for the fun of being on the water?

I looked at some pictures of boats for sale but didn't see any that had space for my king sized bed.

They are cozy to say the least.

Frederick

Kayjay

@fcwilt Haha ... yep, moving there for the fun of moving about the country. It is also cheaper living, epecially for constant cruisers coz there are no mooring fees which can save a couple of grand a year, theres no council tax either for constant movers and being alone living on a narrowboat is just heaven, me and my Nintendo Switch and my X-Box. It's an easy and blissful life, summer is gorgeous, winter is ok the boats can run on either diesel central heating or gas central heating, the former being cheaper. I can't wait, roll on springtime The other thing is the bow room is usually fitted with a double bed, king sized no unfortunately, it's something I'll have to get used to, I have a kingsized myself at the mo.

fcwilt

@Kayjay

How does being on the move all the time work? Do you tie up up night?

And how did you find a job that allows for moving around?

Sounds like a grand way of life for a single person.

Thanks.

Frederick

oliof

@fcwilt my brother and his wife went to live on a boat a couple years back. Her company is fully remote and fully distributed so the boat didn't change a lot, if anything it reinforced things they already knew to be true.

@Kayjay all the best for the move! Too bad I don't live close enough to take a look at the printer (maybe good though, I don't have space).

zapta

@fcwilt said in Big box with Duet 2 Ethernet and 7" PanelDue for sale:

How does being on the move all the time work?

You can find a lot of info about that life style in this channel and a few others https://www.youtube.com/channel/UC6SNxiLzSlh8e0yjndE9o_A

With the current Covid, many employers are open to the work-from-home idea. Not sure though what kind of internet connection, one can expect.

Kayjay

@fcwilt Hi Frederick, Yes, Constant cruisers can moor anywhere for free for up to two weeks then they have to move on. Regarding work, I don't have a problem with that, I'm 68, I retired 18 years ago, it's been the best 18 years of my life. I did miss my workmates at first but being a landlubber I could see a lot of them either visiting homes or in the pub. In the future it'll be kless so but I'm sure I'm going to make new friends. There is a chap that does a Vlog on youtube called Tales from The Swans Neck (which is the name for the tiller) and he has made dozens of new friends, people he sees regularly as he travels around. It's going to be a wonderful life for my final years, I have no intention of ever buying a house again

Kayjay

@zapta It looks interesting. I've been following a vlogger called Andrew who has a vlog call Tales from the Swans Neck which is the name for the tiller ( did I already mention that earlier, sorry if I did)

Kayjay

Oh well it looks like I'll have to put it on Fleabay. Other thoughts I had was to sell the Duet 2 and PanelDue to anyone interested on here and sell the basic Bigbox on Ebay. I just don't know what to do. Obviously I don't want to give it away but on the other hand it's way, way too big to have on a narrowboat. Does anyone have any good ideas that may help me dispose of it. Please remember that it's made of plywood and not the dreaded acrylic (I am so glad I chose ply when crowdfunding it). As I mentioned earlier I could sell the Duet parts and fit the Bigbox with a RAMPS system, I have got so many of those I could buy shares Can anyone offer thoughts on that way of doing things?
Keith

jay_s_uk

you could sell the duet and screen and then donate the printer to a local makerspace

Kayjay

@jay_s_uk Nice suggestion Jay and I'm a very generous guy normally but as things are at the moment I need to raise every penny I can. For one my bank is screaming at me to make my funds look a bit more like they should so as much as I's like to give the Bigbox away as a gift I just cant spare the cash if you follow me. Thanks for the suggestion though, in normal circumstances I would jump at it.

Keith

Phaedrux

Have you checked on the bigbox forums from E3D? Might find a fellow enthusiast there.

Phaedrux

@zapta said in Big box with Duet 2 Ethernet and 7" PanelDue for sale:

You can find a lot of info about that life style in this channel and a few others https://www.youtube.com/channel/UC6SNxiLzSlh8e0yjndE9o_A

Thanks for the rabbit hole.

zapta

@Phaedrux said in Big box with Duet 2 Ethernet and 7" PanelDue for sale:

Thanks for the rabbit hole.

Here is a more relevant one. Would work great for remote Duet3D community support.

https://www.youtube.com/c/CanuckOnTheCut/videos

Phaedrux

@zapta Do toddlers handle narrow boats well?

Kayjay

@Phaedrux Nice one, I hadn;t thought of that. I'll go and take a look.

Kayjay

@Phaedrux Not sure about that, I don't have any toddlers but there was an amusing occasion in 1978 when myself, my wife and my 3 year old daughter were hiring a boat for a couple of weeks. Every time Lyndsey ( my daughter) saw some ducks or in fact any water bird she ran below grabbed a loaf of bread and started throwing it to them saying 'Ere yar duckses eat yer butties" and just in case your a southerner or rather not a north-westener it means "Here you are ducks, eat your sandwiches". We had to laugh so much each time she did it, in fact we bought an extra four loaves of bread for her each time we were shopping... it was so funny.

Kayjay

@zapta Thanks but I've already been given that link. It is really good though so thanks very much for thinking of me

Kayjay

@Phaedrux Ahh so sorry, I've also been given that one too although it is very good. One I follow an awful lot because he's about my age, he suffers the same illness conditions as I do which have helped him immensely, that is depression and anxiety. Both are high on my medication list from my local doc. The Vlog that Andrew produces is Tales from the Swans Neck, which I think I may have mentioned already but it's thew name for the tiller.

I do appreciate all the help though, you guys are a godsend, not just n 3d printing but on lots of other stuff too !!

Kayjay

@Veti You seem to have completely misunderstood my message. If you'd asked instead of just stating that Bigbox moved away from acrylic for a reason. Yes, they did stop using acrylic, it was garbage but at the sane time they also used plywood which was extremely successful. Mine is made of ply and has never given any trouble except from the automatic software creator adding files that it shouldn't have. The files added were meant for the mini kossel and stopped the Bigbox from homing. After an enormous amount of work from Ian for which I was tremendously grateful, he found that it was down to a software problem and nothing wrong with either the Duet or the Bigbox.

Leading on from this it proved that my plywood Bigbox was an amazing piece of equipment and still is. The problem is that your comments have made a lot of potential customers who may have bought my machine turn away and in some case to an Annet ?????? oh boy'
This is Particularly Frederick. Just to let you know Frederick that Veti wasn't in possession of all the facts. Frederic, if you are interested in buying the Plywood Bigbox with Duet 2 Ethernegt and with a brand new unfitted 7" Paneldue then please get in touch with me. We can discuss prices. A comment another poster made about. Prices are what people want to pay and what seller want to accept but the eventually meet in the middle. It's a system that works very, very well, much better than going to auctions.

Phaedrux

Were you able to post on the E3D bigbox forums as well?